ION Neo Shelter Jacket Amp

Active and continuous in and out of water use.Perfect for cold-sessions and also to keep the body warm in between sessions. Women should order the hoodie in general 1-2 sizes smaller, because this model's sizing runs large. MATERIAL - Nam Liong Neoprene  

The Prolimit Predator unisex shoe is our only armored shoe on the market. The armored insole protects you from sharp objects which can cut into your feet. The 3mm neoprene makes sure your feet stay warm. The boot has a reinforced heel for extra support. The difference between the RT and ST is that this boot has a round toe, the split toe allows you to have more balance and control. Armored Aramid insole DCS (Direct contact sole) Airflex 500+ limestone neoprene Heel webbing loop for easy access Foot lock arch control rubber Flatlock seams OCL (Orthopedic controlled last) Water based glue, anti-allergic, environment friendly Heel lock reinforcement For Sizechart click here

Impossibly thin. Impressively fast. We’ve reduced the thickness of the submerged portion of our new High Modulus Prepreg Carbon masts by over 15% compared to our standard Carbon masts, while also increasing both bending and torsional stiffness. The HM80 favours disciplines without wind power - prone surf, pump and downwind. The shorter chord length over the entire mast length reduces drag and increases manoeuvrability. This delivers more glide, more efficient pumping, and quicker turns. The HM85 covers all disciplines, with a focus on wing-foiling. Wind-powered disciplines require edging against the wind to create forward drive. Some of this drive comes from the front wing, and some comes from the mast. To efficiently provide this drive, the chord length in the submerged part of the mast is slightly longer. It increases near the top of the mast to maximise stiffness with no drag penalty, as this part of the mast is clear of the water once on foil. A more efficient underwater body shape means less drag and, hence, high and easier-to-reach top-end speed. Ventilation on the mast is now a thing of the past. We paid particular attention to this detail, so no matter the sea state, ventilation on the mast's TE is significantly reduced. The HM105 has been optimised for racing. The thickness of the submerged part of the mast is a further 1mm thinner than the HM80 and HM85, to provide maximum top-end speed. As a result this mast is not for jumping. Like the HM85, the chord length in the submerged region has been tailored to provide good upwind drive, while the chord length increases above the waterline to maximise stiffness. A more efficient underwater body shape means less drag and, hence, high and easier-to-reach top-end speed. Features15% thinnerIncreased bending and torsional stiffnessReduced dragHM80 for PronePump and DownwindHM85 all disciplinesHM105 optimised for kitefoiling and wingfoil racingMaterialsHigh Modulus Prepreg Carbon INCLUDES:  HM Mast (with gasket), Carbon Mast Cover, Screw Pack B3 (2x M8x25mm Cap screws with plastic washer for Carbon Fuselage and SS316 washer for Aluminium fuselage)

Description The NEW Universal Mast Adaptor is made of a soft, flexible material that deforms around your mast to create a solid and secure connection for your motor. ⚠️ Note: This is the Adaptor ONLY – the Universal Motor Pod is not included. If you already have a Universal Motor Pod from a previous Custom Mast Adaptor, it will be compatible with this Universal Mast Adaptor. The unique design features six sized “keys” that can be installed into the front of the adaptor, allowing fitment across different mast shapes and sizes between 90 mm and 150 mm. The user will need to test the included keys to find the correct fit for their mast and desired motor position. It is essential that the correct key size is used to allow proper clamping force between the two halves. 👉 We highly recommend watching the installation video for proper setup. Note: A very small number of masts exceed the 150 mm limit and require a custom adaptor. Known example: Neil Pryde Glide Wind. What’s Included 1x Large Nose Adaptor Piece 1x Small Nose Adaptor Piece 1x Rear Adaptor Piece 6x Keys (various sizes) ❌ Universal Motor Pod (outer pieces) not included Compatible With Universal Motor Pod

Our new high-strength pre-preg carbon fuselage is strong, durable and corrosion resistant, and weighs ~50% less than the alloy version, with equal strength and stiffness. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. The forgiving longer C700 fuselage is ideal for wing-foiling or learning to foil, offering greater stability and more control. Features High-performance carbon pre-preg construction Weighs ~50% less than the alloy version with equal strength and stiffness GeoLock tapered geometry locking system for optimised load bearing connection Hydrodynamically-optimised shape for minimal resistance Compatible with all Sonar Masts Compatible with all Sonar Front Wings Available in C600 or C700 sizes

Keep this mini Torx T40 Screwdriver with lanyard in your pocket or on your key ring for fast foil or handle setup changes and tightening. Compatible with the Sonar Foils and ShiftLock Modular Track System. WARNING: Adjustments your foil setup in the water can result in the loss of screw or gear. Due to the nature of its compact geometry please be aware that the T40 micro tool will have a reduced torque moment that can be applied to your screw’s connector. We recommend checking screw tightness regularly before and during sessions. Alway wash with fresh water after each use and ensure your T40 Tool is fully dry before packing away. FeaturesCorrosion resistantErgonomic finger gripCompatible with Sonar FoilCompatible with ShiftLock MaterialsHigh-quality SS316 with PVD-coating

This coiled calf leash with double swivels provides you with a secure connection to your foilboard. The comfortable, no-slip calf cuff helps keep the cord above the water, reducing drag and tangles with your foil system. Features Coiled calf leash keeps cord above water to reduce drag Lightweight neoprene calf cuff with stretch resistant TPU top layer Comfort cuff lining and silicon inner grip to reduce slipping Double SS316 swivels reduce tangles Easy grab finger tab for fast and safe release Strong injection-moulded velcro for light and sand-resistant hold 7mm high-grade coiled PU cord

LIGHTWIND & DOWNWIND FREEDOM IN AN INFLATABLE DESIGN The ENSIS WALTZ AIR redefines downwind and lightwind foiling with its compact, ultra-light, and stiff inflatable construction. Designed for downwind SUP, lightwind winging, SUP surf, and pump foiling, it offers the glide, lift, and control of a hardboard while maintaining the convenience of easy transport and compact storage. Available in 7’0” (115 L), 7’6” (135 L), and 7’9” (145 L), the WALTZ AIR combines a long, narrow outline with an elongated pintail for efficient acceleration and effortless foil take-offs. Its X-Woven Fusion Construction and precision-welded seams deliver outstanding rigidity and responsiveness, making the board up to 40% lighter than standard inflatable designs. The integrated 75 cm carbon plate foil box ensures direct power transfer and a reactive, controlled feel underfoot. Printed reference markings allow precise foil placement and easy setup replication. Forgiving rounded nose shaping softens touchdowns while maintaining glide and efficiency, and optional footstrap inserts offer added control during powered sessions. Materials X-Woven Fusion Construction Carbon plate foil box (75 cm) Precision-welded seams High-pressure dropstitch core BOARD FEATURES Experience our experience. Ultra-Light & Stiff Construction X-Woven Fusion Technology fuses cross-woven dropstitch fibres for a high-stiffness, low-weight board with exceptional responsiveness. Early Take-Off Long, narrow outline and extended pintail ensure quick acceleration and effortless lift in lightwind or downwind conditions. Direct Foil Connection Carbon plate foil box delivers superior stiffness and feedback for reactive, precise control. Forgiving Touchdowns Rounded nose design cushions impacts and maintains smooth recovery for uninterrupted glide. Footstrap Option Pre-installed inserts for two front straps, positioned for comfortable and controlled riding. Welded Rail Technology Mechanically bonded seams guarantee airtight durability and eliminate the risk of glue fatigue over time. Quality Assurance Each ENSIS inflatable board undergoes strict quality control for long-lasting performance and reliability. Accessories – Triple action pump (dual chamber, integrated pressure gauge) – Coil waist leash (adjustable 70–110 cm, 240 cm length) – Coil knee leash (140 cm length) – ENSIS twist footstraps (memory fit and screw system) Scope of Delivery The ENSIS WALTZ AIR comes in a compact, easy-to-carry bag for convenient transport and storage. A high-efficiency double action pump is included for quick and effortless inflation before your session. Footstraps and leash are available separately, allowing riders to customise their setup according to personal preference and riding style. Who It’s For Ideal for riders seeking an ultra-light, travel-friendly board for downwind SUP, lightwind winging, or pump foiling. The WALTZ AIR offers hardboard-like performance in a compact inflatable package—stiff, efficient, and ready for adventure anywhere.