NORTH Sonar Carbon Fuselage

M8x35 TH CS Screws with washersSonar Fuselage Screw Pack B attaches your Sonar A600 or A700 Fuselage to your Sonar AF or CF Mast. ATTENTION: Sonar Fuselage Screw Pack B (M8x35 TH CS T40) is designed to fit Sonar Fuselage and Carbon Fuselage with straight holes. Some earlier Sonar Fuselage Screw Pack B attaches your Sonar A600 or A700 Fuselage to your Sonar AF or CF Mast. ATTENTION: Sonar Fuselage Screw Pack B (M8x35 TH CS T40) is designed to fit Sonar Fuselage and Carbon Fuselage with straight holes. Some earlier models of the Sonar Carbon Fuselage do not have countersunk holes, so will require this Screw Pack B (M8x35 TH CS). Newer models of the Sonar Carbon Fuselage will have tapered countersink holes. These allow the head of a flathead screw to sit flush with the top of the fuselage. Tapered holes = Screw Pack B2. If your carbon fuselage has tapered holes (similar to your Sonar front wing), you will require the Sonar Fuselage Screw Pack B2 (M8x30 TH CSK T40 - 85009.240145). If you are wanting to attach an HM Carbon Mast to your Aluminium or earlier model carbon fuselage with straight holes, you will need Sonar Fuselage Screw Pack B3 (M8x25 TH CS). Please see the Size Chart for details. Includes: 2x M8x35 THCS T40 Screws, 2x M8 1.4x12.6OD Flat Washers

The rear Stabilizer’s main role is to maintain a level and stable flight path. But conditions and user preference may change what stabilizer angle feels the best (aka the sweet spot). Shimming changes the angle of attack (AOA) and controls the amount of downforce the stabilizer creates on the overall foil system - to increase the stabilizer AOA and front foot pressure, add positive shim. The smallest tweak in the AOA can improve comfort, reduce fatigue, change the cadence of your pump or the turning radius of your carve and increase/decrease your front and rear foot pressure without changing your foot position. With the Sonar Shim Kit you can stack multiple shims, from our base setting it covers from -0.5 to +2.5 degrees. Finetune the way your foil system performs and change the way you ride. You’re in control. 1x -0.5 Deg Shim, 1x 0.5 Deg Shim, 2x 1 Deg Shim   Features Stackable to cover -0.5deg to +2.5deg of tuning Instant customisation without removing the Stabilizer Tune for different disciplines and front wings Cost-efficient foil system adjustment

The Seeker DLX is a premium floatation vest designed for adventure-seeking windsurfers and kiters. With a streamlined design, it allows for maximum mobility and features a large reflective shoulder panel, a front pocket, and rear tabs for a water pack. Meeting CE50 certification guidelines, it ensures safety during water activities, and its fold-out pocket and extra cush foam provide added convenience and comfort during downwinders. MATERIALS:Ultra-soft buoyancy foam DIMENSIONS:Youth- Chest size 76-86 cmXS-S- Chest size 86-96 cmM-L- Chest size 96-106 cmXL-XXL- Chest Size 106-116 cm3XL- Chest Size 116-132 cmFEATURES:Minimalist wind sport vest gets rid of cumbersome frillsSoft buoyancy foam keeps you afloat with comfortZippered side entry secures you in with adjustable bucklesFold out front cell phone pocketBack panel reef walker pocketReflective piping and panels for visibility in the waterFeatures rear attachment points for a hydration solutionThis vest is CE 50 certified, not USCG approved

Our new highest quality pre-preg carbon mast delivers a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction, the refined one-piece design presents a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions. Features GeoLock.

Ideal for progressing, you’ll find the larger MAv2 Prime front wings provide a stable set-up for learning to wing foil or towing behind a boat. At a very low board speed, these front wings easily generate a great amount of lift without the need to pump. They are super stable, so you can focus more on the wing in your hands. The profile section prioritises pitch stability, early takeoffs and low stall speed. More sweep in the TE than the smaller size helps to make these big wings more manoeuvrable and easier to turn. More anhedral in the front view provides directional stability. The MA1500v2 is ideal for intermediate wingfoilers progressing from the larger sizes, and a lighter-weight (<70kg) rider could learn to wingfoil. It has the same airfoil section as the larger wings for low stall-speed and pitch stability, but a smaller area and higher aspect ratio to provide higher speed, better turning and more glide. The Prime pre-preg e-glass construction front wings are engineered from the same moulds as our carbon pre-preg front wings and deliver the same high performance, durability and impact resistance as the carbon pre-preg, at a more accessible price.FeaturesNovice or lightwind wing and boat foilingDesigned to get you up on foil faster and shorten your learning curveStable learn-to-foil setupMid-aspect shape ideal for progressing in all disciplinesGenerate lift easily without pumping  Pitch stable across the entire speed range   Impressive agility for size      Ventilation-free tip breachingHigh-performance durability and impact resistance at a more accessible pricePrime e-glass pre-preg constructed from the same moulds as carbon pre-pregMaterialsPrime Pre-Preg E-glass Construction  INCLUDED: Front Wing with Cover, Sonar Screw Pack E (M8x33)

Speed S208v2 Sonar Stabilizer The North Speed S208v2 Sonar Stabilizer is designed for maximum speed while providing the pitch stability required for powered riding. Description The S208v2 is recommended for riders pushing high speeds with faster front wings. Its foil sections are tuned for efficiency in the mid to high-speed range, while the dihedral rondure in front view provides a more locked-in feel. This can boost confidence when powered up and pushing high speeds and upwind angles. The pre-preg high modulus carbon construction ensures optimal stiffness and direct performance. Thin profile sections reduce drag, while the material properties help maintain structural integrity and rigidity. Features Designed for high-speed performance Thinner profile Higher aspect ratio Ventilation-free tip breaching Easy breach recovery Materials High Modulus Carbon Prepreg Titanium Screws Technical Specifications Size Color Product Code S208 Black 85004.260141

HIGHLIGHTS 165 x 90 bolt pattern Lightweight design Precisely CNC-machined WHAT RIDERS SAY "The tapered adaptor means a better load transfer and more direct feel. Sometimes the smallest details make the biggest difference." - Uli Sommerlatt, Foil Designer One union The Sonar Foil System is connected to the board by a lightweight CNC-machined aluminium Board Adaptor with a tapered geometry locking connection that engages with the mast. Fusing Board Adaptor and mast together to build one union for optimum load transfer and a stronger, more direct feeling and steering impulse when foiling. Incorporates a strong geometry locking connection for a more direct feel. Fits all boards with 165x90mm mounting pattern. 165 x 90 bolt pattern The Sonar Board Adaptor can be mounted to any foil board with a 165x90mm bolt pattern. Lightweight design Precisely CNC-machined 6061-T6 anodised aluminum. DETAILS GEOMETRY LOCKING CONNECTION Between Mast and Adaptor. FOIL TO BOARD MOUNTING SCREWS SUPPLIED WITH NORTH FOILBOARDS   165 X 90 BOLT PATTERN The Sonar Board Adaptor can be mounted to any foil board with a 165x90mm bolt pattern. LIGHTWEIGHT DESIGN   RUBBER GASKET   INCLUDED IN FOIL EDITION AND ALSO AVAILABLE AS A SEPARATE PIECE.   PRECISELY CNC-MACHINED 6061-T6 anodised aluminum.

Flat, loose and fast. The S238 Stabilizer is a high-performance upgrade to the Sonar Foil System for experienced riders. It has a higher aspect ratio than the S270, which means less drag, and the flatter rondure (front view) enables more manoeuvrability. The S238 is designed to match the new MA1200/MA1500 and larger HA front wings, giving your setup a faster and more responsive feel. The North stabs are mounted on top of the fuselage, which helps them to avoid turbulence from the flow of the front wing, creating a smoother ride. This top mounting also gives the rider an early breach warning - the stab pierces the water surface first, giving you a better chance of recovery before your front wing gets too high. Like the Front Wings, all Sonar Stabilizers are pre-preg carbon construction, ensuring optimal stiffness and direct performance. The thin profile section reduces drag, while the material properties help maintain structural integrity and rigidity. Stabs have a huge influence on performance. As you progress to smaller wing sizes, we recommend changing to a smaller stabilizer to be more manoeuvrable. Experienced riders will really feel the difference. A new tail can have a big impact on your style.FeaturesEasy recovery from surface breachingFlat / loose / fastThinner profileHigher aspect ratioMaterialsCarbon Pre-pregTitanium ScrewsINCLUDED: Stabilizer, Cover, Stabilizer Screw Pack C (M8x16mm)