NORTH NOVA WING (incl. Boom) 2025

Balanced, easy-to-use all-round wing with a wide wind range, low-end power, high-end stability and light, intuitive handling.FeaturesEffortless upwind performanceEasy gybestacks and transitionsStable trailering for riding swellComplete with fixed GripLock Carbon BoomFast response UDi-Carbon stiffening inside LERadiate Geometric Panel Layout and Load Diffuser for even canopy tensionCompact outline for reduced tip-strikeLiteVision windowsDouble HyperFlow for independent LE/strut pressureMaterialsN-X6 Trailing Edge for shapehold and longevityN-HTRS High Performance Canopy MaterialDurable and Lightweight Dacron AirframeLightweight bladdersStrategic STPU scuff protectionINCLUDED: Wing, GripLock Carbon Boom, Handle Bumper, Wrist Wing Leash, Bag, Repair Kit4.2 - 7.0m have the GripLock Carbon 1100 Boom2.2 - 3.5m have the GripLock Carbon 950 Boom

M8x35 TH CS Screws with washersSonar Fuselage Screw Pack B attaches your Sonar A600 or A700 Fuselage to your Sonar AF or CF Mast. ATTENTION: Sonar Fuselage Screw Pack B (M8x35 TH CS T40) is designed to fit Sonar Fuselage and Carbon Fuselage with straight holes. Some earlier Sonar Fuselage Screw Pack B attaches your Sonar A600 or A700 Fuselage to your Sonar AF or CF Mast. ATTENTION: Sonar Fuselage Screw Pack B (M8x35 TH CS T40) is designed to fit Sonar Fuselage and Carbon Fuselage with straight holes. Some earlier models of the Sonar Carbon Fuselage do not have countersunk holes, so will require this Screw Pack B (M8x35 TH CS). Newer models of the Sonar Carbon Fuselage will have tapered countersink holes. These allow the head of a flathead screw to sit flush with the top of the fuselage. Tapered holes = Screw Pack B2. If your carbon fuselage has tapered holes (similar to your Sonar front wing), you will require the Sonar Fuselage Screw Pack B2 (M8x30 TH CSK T40 - 85009.240145). If you are wanting to attach an HM Carbon Mast to your Aluminium or earlier model carbon fuselage with straight holes, you will need Sonar Fuselage Screw Pack B3 (M8x25 TH CS). Please see the Size Chart for details. Includes: 2x M8x35 THCS T40 Screws, 2x M8 1.4x12.6OD Flat Washers

SIZES: 70 | 80 | 100 | 115Introducing the newest board to the foil lineup, the Hover Wing Foil LE ultra compact wing foil board. 15% shorter than our original Hover Wing Foil boards, the compressed volume distribution is focused in the main stance area, allowing for easy starts. This compact board does require a bit more skill to get going on the foil and to remain stable. The compact design dramatically decreases swing weight, feeling like you are riding directly on the foil. It’s two-stage rocker makes it easy to get on the foil, while providing a balanced feel when on the foil with ample nose lift. For riders who already know how to foil and are looking for the shortest board possible, the Hover Wing Foil LE Ultra Compact board is the latest and greatest and can’t be passed up.DETAILS3K Carbon / Wood CNC EPS Core ConstructionProvides the lightest board weight possible and the stiffest flex which optimizes your surf foiling performance.Diamond Diecut EVA Pad with Micro Dot EmbossingThe micro dot embossed EVA pad is lightweight, ensuring a strong grip and better durability over time.High density PVC foil track system with (2) 10” US BoxesOur high-density PVC foil track system with (2) 10” US boxes will get you on the fin or the foil as quickly as possible.Back Foot Arch SupportProvides a comfortable stance, an easily recognized foot position, and a better grip on the board.Tail Kick Lift-Off DesignThe tail kick lift-off design eliminates slowing you down, allows you to get on the foil easier, and get flying quicker.Footstrap Insert Layout (Footstraps not included)Regardless of what brand or style you’re riding, how much you weigh, what your style is, this board has an option for you.

JET 1250 COMPLETE Foil Surfing/Wake Foiling/Wing-Surfing PRODUCT DESCRIPTION Naish Jet foils feature a medium aspect ratio delta wing planform with moderate anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from wind surfing and wing-surfing to downwind kite foiling. The 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 1250 is ideal for riders 160-210 lbs PERFORMANCE FEATURES Jet 1250 Front Wing = Optimized lift, speed & turning Stabilizer 320 Back Wing = Intuitive turning & stability 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response   CONSTRUCTION FEATURES Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts 5 x 20 mm Torx Head Stainless Steel Screws (Connect Wings to Fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (Connect Mast to Fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Direct Connect Plate to Board) = Superior torque + corrosion resistant

JET HA 1800 COMPLETE Expert Performance Foil Surfing/Downwind Foiling/Wing-Surfing PRODUCT DESCRIPTION Designed for advanced and semi-advanced foilers looking to push their performance levels in surf, SUP, Wing-surfer and downwind foiling. These wings feature high aspect ratio planforms and proprietary thin section profiles – the result is maximum glide, excellent pumping, and improved top speed while still maintaining the excellent turning and control that defines the Jet range. To compliment the high-end performance of these new wings, the complete foils feature a new high aspect stabilizer as well that emphasize pumping ability and glide. Designed with a thinner profile and higher aspect ratio, they support the higher speed of the HA front wings while giving excellent response to rider input. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system.  Jet 1800 is ideal for riders up to 240 lbs PERFORMANCE FEATURES Jet HA 1800 Front Wing = Optimized glide & improved top speed Stabilizer HA  310 Back Wing = High-speed stability & responsive pumping 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response CONSTRUCTION FEATURES Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/ Kite 64 cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts 5 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant

Unleash Controlled Power with Nobitech Foil Straps Elevate your kitesurfing experience with the confidence and control of Nobitech Wave Straps. These innovative straps lock you into your board, maximizing your responsiveness and precision on the water. Boost your jumps and maneuvers: Wave Straps ensure your board stays firmly connected to your feet, allowing you to push off with explosive power for incredible jumps and technical tricks. Ride with confidence: Feel the difference of superior control. Wave Straps provide a secure connection, giving you the freedom to push your limits and explore the full potential of your kitesurfing.  ADDITIONAL EQUIPMENTEquipment is included in the price of the product:Complete - 3 straps

HIGHLIGHTS Switch effortlessly between disciplines - no tools required. Intuitive single-action reload Uncompromised direct performance Think Less, Feel More Switch effortlessly between disciplines with the Toolless Interloop, our no-tools required modular harness loop replacement system. The Navigator Control System connects you intuitively to your kite, using industry-leading SK99 Dyneema lines from Liros for precise performance. The 2022 Connect Quick Release and leash now complies with ISO Standard 21853:2020. Faster, safer release and intuitive single-action reload in all conditions. Available in three sizes, the refined ergonomic design offers durability, comfort and tactile control. Knowing your kite's position just became second nature. Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. The Toolless InterLoops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Intuitive single-action reload Security and performance in all conditions. Our patented and ISO-approved Connect Quick Release (QR) raises the bar in kite control system safety. Uncompromised direct performance Our industry-leading 100% Dyneema SK99 flying lines are strong, thinner profile and pre-stretched for less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Fine-tune the turning speed of your kite The Navigator is available in three adjustable bar length sizes: 38-43cm, 40-45cm and 45-50cm.  DETAILS TOOLLESS INTERLOOP SYSTEM WITH LOCKGUARD Switch effortlessly between disciplines - no tools required. Simply push, twist, pull, lock and go. Loops are made from optimised TPU material for flex and durability, with a more rigid freeride security finger to prevent unexpected unhooking. Flexible LockGuard safety ring prevents accidental release of your interloop. SOFT EVA BAR ENDS WITH RETRACTABLE LINE WINDERS The positive buoyancy bar ends with integrated line winder bungees are injection moulded in one piece with no-glue seams for long-lasting quality. The bar ends ensure nothing hard comes in touch with you or your board, float the entire bar, and also contain the concealed rear line adjustment. Even the best quality lines shrink over time, so after a month, we recommend you check your lines are all even and drop them to the bottom knot. It’s easy and takes only a minute to make the change. PROTECTIVE PU-COVERED LEADER LINES To help prevent line abrasion from uncovered lines against your skin, we've used colour-coded PU tubing covers. The covers also help them remain rigid and out of the way when the flying lines aren't under tension. ADJUSTABLE CLEATED TRIM SYSTEM Provides industry-proven line-adjustment when needed. The cleat base has been designed with circular geometry for consistent bar spin. In overpowered conditions the cleat allows you to shorten your front lines and remain in a comfortable body position. LIGHTWEIGHT OVER-MOLDED TRIM HANDLE WITH DYNEEMA LINES Easy to reach moulded trim handle doesn't hurt when it hits you. Made from Nylon/EVA for strength with a textured soft-touch grip. Top-quality German-made extremely high wear Dyneema depower and trim line with a special impregnation coating for resistance to abrasion. DURABLE COVERED MAINLINE, WITH CUSTOMISED TPU TUBING Symmetric multibore landing line channel allows the landing line/flying line to pass through without snagging, regardless of the orientation when deploying or reloading. Crafted from a patented material specifically formulated for high abrasion flexible applications. CUSTOM LOW-FRICTION SPINNING HANDLE Unspin your front lines easily. ADJUSTABLE LENGTH FLYING LINES 22M (12M + 10M) 22m lines have a split at 12m, which is far enough for the bar to travel to completely depower our largest kite when you flag out. Remove the standard 10m top section of flying line and 12m lines are ideal for schools to teach with and for foil racing. 8m and 6m line extensions are available as an accessory for wave riding or tighter kiteloops. KOOK-PROOF FLYING LINE CONNECTORS Ensure you always set up your flying lines correctly. Designed to be exactly the same length so you can easily change the front (knotted end) and rear (lark's head loop) connectors to match most other manufacturers' kite configurations. Please familiarise yourself with the safety procedures and trimming instructions outlined in your kite’s user manual. PREMIUM QUICK RELEASE LEASH The Navigator Control System is supplied with a premium quality freeride Leash with a high load carabiner, soft neoprene cover and non-abrasive elasticised webbing. The leash QR mechanism has been modified to ensure correct orientation is maintained when released for consistent, safe release and reload. INTUITIVE SINGLE-ACTION RELOAD Security and performance in all conditions. Our patented and ISO-approved Connect Quick Release (QR) raises the bar in kite control system safety. The red QR handle has been ergonomically designed to fit in your hand comfortably for an industry-standard push away release. All loaded or running surfaces feature highly polished 316 stainless steel and low-friction components. The larger diameter bungee inside the QR helps reduce accidental release. INDUSTRY-LEADING 100% DYNEEMA SK99 FLYING LINES Strong, thinner profile, pre-stretched flying lines mean less parasitic drag and uncompromised direct performance. With 88m of flying lines in the air, you can really feel the difference thinner line creates. Our latest technology high-load LIROS DC-401 Pro flying lines have extreme stretch resistance and minimal diameter (1.6mm). THREE ADJUSTABLE BAR LENGTH OPTIONS Fine tune the turning speed of your kite. The Navigator is available in three sizes 50-55cm (L), 45-50cm (M) and 38-43cm (S). To extend/retract bar length simply pull out cassettes on the bar-ends, rotate 180 degrees and snap back into place. OMNIDIRECTIONAL GRIP WITH OFFSET FINGER BAR AND COLOUR-CODED COMPONENTS Feel more connected. The Navigator is designed with a comfortable ergonomic grip for a natural grasp and the tactile offset finger bar is slightly oval, so you can feel when the control bar is orientated correctly. The colour-coded bar ends, leader tubing and line retainer pull tabs give a nod to our sailing heritage, port (red) and starboard (green). SPINNING LEASH ATTACHMENT RING Our oval-shaped leash pin ring is elongated for easier fastening of the leash carabiner, and spins to help prevent your landing line from twisting. DYNEEMA TRIM LINE Top-quality German-made extremely high wear Dyneema depower and trim lines, with special impregnation coating for resistance to abrasion.