Multifunctional molded KITE WAIST harness, 3D shaped with Hybrid technology. The outer skin is molded and inside stitched with EVA pillow. The medium back support height allows more flexibility during extreme movement while the higher sidewall protects the ribs. The slide in barpad gives incredible bar stability.
Pre-curved and 3D shaped
EZ elastic belt for quick ftting.
High load optimized outline profle
Molded outside construction
Patented pin-release PLT bar system
Molded slide-in Barpad for no ride-up
Kiteknife and car-key front pocket
Dual density support pillow
Internal load plate Mark II
For Sizechart click here
ION bringt sein erstes Trapez auf den Markt, das ausschließlich auf Wingfoilen ausgerichtet ist. Das minimalistische und ultraleichte Rogue folgt dem, was andere Windwassersportarten bereits etabliert haben. Das Tragen eine Trapezes verbessert die Kraftverteilung und nimmt den Druck von den Armen! Das Ergebnis: Weniger körperliche Anstrengung und längere Sessions! Die Curv-Konstruktion bietet Flexibilität und zusätzliche Unterstützung im Rückenbereich. Das Rogue verfügt über einen seitlich-verschiebbaren Haken, sodass dieser dich beim Rauspaddeln nicht beeinträchtigt. Du merkst ihn nur dann, wenn du ihn benutzt.
For Sizechart click here
Das Radar ist dein Allrounder unter den Kite Sitztrapezen. Es kommt mit einer Curv-Teilkonstruktion für umfassenden Komfort und eine verbesserte Kraftübertragung. Die ergonomischen Beinschlaufen, inspiriert von der Technologie von Klettergurten, wurden entwickelt, um Bewegungsfreiheit ohne Druckstellen zu ermöglichen. Ein integrierter Neoprengurt erhöht den Komfort zusätzlich und erzeugt ein gutes Feingefühl für Flex und Twist. Kommt mit ION's Spectre Bar (inklusive Kite-Haken) und integriertem Kite_knife 2.0 Multitool.
For Sizechart click here
Infos & Characteristics
Having worked on ergonomic designs for a while, our goal was to push our frame concept to more stiffness, allowing a better support of the back & a lower fit. But something 100% hard was not an option: Our back needs some adaptability & human morphology is unique.
So here comes the ECLIPSE, a skilful balance between stiffness & flex that brings support where you need it and the freedom to move the way you want.
The harness comes with a standard hook, a rope and a knife.
The NEW HAWK is the ultimate freestyle/wave/freeride harness. 4 point MPL attachment. The unique high back support and low side support outline allows for maximum movability without losing back support during your wave or freestyle sessions. Full neoprene inside with EVA pillow and neoprene softedges for a rash free session. True 3D shaping and pre-curving together with the dual density molded inside pillow keeps you comfortable and stable. The Hawk has the molded slide-in bar pad for the best rib protection and no ride-up.
Pre-curved and 3D shaped
Neoprene waist belt
Wave optimized outline profle
Molded outside construction
Patented pin-release PLT FAT BAR system with multistrap barends
Stump nose hook with cross bar
Molded slide-in Barpad for no ride-up
Multiple leash connectors
Kiteknife and car-key front pocket
Dual density support pillow
4 way MPL bar attachments
For Sizechart click here
Infos & Characteristics
Having worked on ergonomic designs for a while, our goal was to push our frame concept to more stiffness, allowing a better support of the back & a lower fit. But something 100% hard was not an option: Our back needs some adaptability & human morphology is unique.
So here comes the ECLIPSE, a skilful balance between stiffness & flex that brings support where you need it and the freedom to move the way you want.
XS
S
M
L
XL
XXL
WAISTGIRTH
68-72
72-79
79-86
86-93
93-100
100-108
SPREADERBAR(IN CM)
22
24
28
32
34
34
WHAT ABOUT IT
If you are looking for a comfy fit instead of maximum weight reduction the ‘Gravity’ Model is the perfect harness to wear!. The first moment you put the harness on it’s a match! Its easy to wear and has a lot of support on the critical parts. The new 2.0 Easyfix webbing straps in combination with the QR system will have you on the water in a second!
The water-repellent neoprene padding on the inside of the ‘Gravity02’ immediately gives a secure and comfortable feeling. With the 2.0 webbing straps and QR buckle you are on the water within seconds. This harness is everything you need.
KEY FEATURES
/ Multi Use Harness/ Fixtip Spreaderbarcover/ Multi Use Spreaderbar/ 360 Molded Flexshell/ Padded Interior/ Density Foam/ Pre Curved Lumbar Fit/ 2.0 Easyfix Webbing Straps/ Quick Release Spreader System
MATERIALS/
/ 60% Polyester/ 40% Neoprene
INCLUDES/
/ Detachable HP Loop
SIZES/
XS – S – ML – XL – XL
XXS (26”-28”) | XS (28”-30”) | S (30”-32”) | M (32”-34”) | L (34”-36”) | XL (36”-38”)No longer do you have to sacrifice support for movement with the Boss waist harness. Updated for 2018, the Boss features an allnew outline, which gives riders greater range of motion, freedom of movementand a hefty boost in support. A stiff back panel features a double layer of pre-shaped PE plates in the back, which—coupled with redesigned 3D shaping—delivers better load spread and support withoutsacrificing its compact, low profile. The spreader bar features an ergonomic memory foam pad with extensions that insert into the sides of the harness and lock the bar into place.
FLEXIBLE, FLYWEIGHT SHELL HARNESSStand out on the water. We removed the stiff core typically found in a shell harness and replaced it with tough and lightweight Surlyn® material developed by science geeks at duPont in order to retain most of the benefits of a hard shell while improving flex in places riders need it most. This low profile harness can be used for both kiteboarding and windsurfing, in freestyle, wave or freeride disciplines.
» Ultra lightweight durable composite shell core» Low Profile design allows full range of movement» Weightless natural feeling» Compatible with the fireball system» Fusion composite core that adapts to the shape of your back over time» Harness doesn’t ride up, locking itself in place
Sizechart:
FLEXCORE – CORE SUPPORT
The softest and most comfortable harness in our range. The Evo offers maximum comfort through an ultra light and soft construction at an affordable price.
» Low profile design for ultimate comfort» Ultra light weight» Alternative dual safety line attachment rings» Stainless steel crossover spreader bar EZ 4 connection points» Non water absorbing EVA bar pad» Elastic buckle covers and webbing keepers» 360 power strap» Back base support system» Anti-chafe seams
The unrivaled benchmark in carbon-fiber hard-shell harnesses, the Elite Carbon V8 continues to lead the way thanks to its data-based design and ergonomic shape for superior support and comfort. Built with the latest in material technology, including 12K molded carbon fiber, limestone-based neoprene, and Fusion closed-cell memory foam for maximum durability and performance. Equipped with Unity Ladder-Lock Straps so it's ready to integrate with our Unity Spreader Bar (goodbye sloppy webbing!), the Elite Carbon is constructed using top-shelf 12K carbon fiber, which ensures a durable, strong Armor Shell frame in a lightweight, high-performance package. When combined with our Fusion Memory Foam and proprietary Shell Skin technology with Lumbar Lock shaping, the Elite Carbon provides the ultimate in connection, feel and support.
*Spreader bar sold separately.
SizesX-Small, Small, Medium, Large, X-Large
UNITY DIRECT CONNECTION
Comprised of two revolutionary pieces, the Unity Spreader Bar and the Unity Ladder-Lock Straps. The Unity Connection System is available exclusively on our Elite Carbon, Saber, and Lyte Direct harnesses. Gone is the ever-loosening harness webbing, replaced by unique Unity Ladder-Lock Straps that completely eliminate spreader bar rise. Gone are mid-session fluctuations in tightness and fit, replaced by the absolute locked-in feel of our ambidextrous Tension- Lock latch closure. Gone is the critical yet overlooked connection between your body, the harness, and kite or sail, replaced by a next-level spreader bar-system.
Apex
-Protection Pad
-Wrap_Tec
-X_Spine
-Soft_Edge
3D Zone Shape
Partiell dreidimensional vorgeformter Trapezkörper für minimale Bewegungen des Trapezes und einen perfekten Sitz.
Internal Flex_Belt
Hält das Trapez bei unhooked Tricks in Position.
Protection Pad
Spreaderbar aus Metall mit einem neuen Gurtbandsystem, das die Lasten besser verteilt und die Spreaderbar davon abhält horizontal zu rotieren.
Dual Density Schaum
Zwei einzigartige Schäume sorgen für einen ausgesprochen komfortablen Rückenbereich.
HARNESSES MEN
Size Inch
XS
25''-29''
S
28''-31''
M
30''-33''
L
32''-35''
XL
34''-37''
ION entwickelt seinen Bestseller Apex 8 stetig weiter und verpasst ihm regelmäßig neue Features. Mit einem Flex Index von 8 gehört das Trapez zu den mittelharten Modellen der ION Kitesurftrapeze. Die einzigartige 3D Curv_Spine in Kombination mit der höher geschnittenen Form verteilt die Kräfte gleichmäßig auf eine größere Fläche und bietet optimalen Support im Rückenbereich. Zusätzlich sorgen flexible Seitenteile für mehr Bewegungsfreiheit und machen das Apex 8 zum perfekt ausbalancierten Trapez. Das Rundumpaket wird durch die bewährte C_Bar 2.0 inkl. Stainless Steel Haken abgerundet, somit bist du perfekt ausgestattet für die nächste Session.
for Sizechart click here
Attacking the elements with the compact new developed harness. More Elasticity then our Vapor working with the same outline but a complete different inner and outer construction. The molded compression shell construction gives a softer feel, more maneuverability and comfort. Handle pass leash, Safety leash side connection and a comfortable ride.
Features:
3D compression molded technology
Neoprene soft foam inside
Handle pass leash
Side connection for safety leash
Neoprene softedges
Compact shape with maximum support
EZ Belt construction
Integrated bar pad
Equipped with our new ALPHA bar with electro plated finish
Mark III shaping plates
From the outside, the Saber looks the same as our other Ride Engine harness—but look closer. Using the same proprietary data that created our Elite Carbon hard-shell shape, the frame of the Saber is actually a Structurally Engineered Shell of slightly softer composite material for the kitesurfer or windsurfer that wants a bit more freedom in their ride. The injected-molded shell has purpose-driven contours that deliver more torsional flex than the Elite Carbon and Lyte harnesses while still providing the full benefits of Lumbar Lock fit and that coveted Ride Engine locked-in feel. The Saber comes equipped with Unity Ladder-Lock Straps so it's ready to plug into our Unity Spreader Bar for maximum connectivity and zero slippage.
*Spreader bar sold separately.
SizesX-Small, Small, Medium, Large, X-Large
Feature
Anatomical backplate
Feature
3D moulded exterior
Feature
Soft neoprene edges
Feature
Battle belt 2.0: soft neoprene edges, new velcro, slim design, safety knife pocket
Feature
Flexcovers
Feature
HP system with reinforced guidance holes
Feature
Key pocket 2.0: keyloop with mini-buckle
Feature
Reduced height for more comfort and freedom of movement
CLICK HERE FOR SIZECHART
Das Apex ist das perfekte Trapez für alle, die Flexibilität in Kombination mit guten Supporteigenschaften im Rückenbereich suchen. Mit einem Flex-Index von 8 gehört es zu den mittelharten Trapezen. Flexible Seitenteile und ein integrierter flexibler Gurt sorgen füe ausreichend Bewegungsfreiheit. Ein EVA-Polster auf der Innenseite sorgt für Dämpfung, während die 3D_Plus-Spine den Rücken stützt. Das Ergebnis ist eine gute Balance zwischen Bewegungsfreiheit und Unterstützung der Rückenmuskulatur durch die höher geschnittene Form. Das Trapez ist dank dem Einsatz der Curv-Teilkonstruktion, dem nicht-wasserabsorbierenden HD_Foam und der schlanken Spectre Bar (inklusive Kite-Haken) ein absolutes Leichtgewicht. Die Curv_Flaps der Spectre Bar sorgen für eine nahtlose und optimale Kraftverteilung im gesamten Trapez. Das Apex kommt mit einem integrierten Kite_Knife Multitool 2.0 und HPL_Slider.
The NEW HAWK is the ultimate freestyle/wave/freeride harness. 4 point MPL attachment. The unique high back support and low side support outline allows for maximum movability without losing back support during your wave or freestyle sessions. Full neoprene inside with EVA pillow and neoprene softedges for a rash free session. True 3D shaping and pre-curving together with the dual density molded inside pillow keeps you comfortable and stable. The Hawk has the molded slide-in bar pad for the best rib protection and no ride-up.
Pre-curved and 3D shaped
Neoprene waist belt
Wave optimized outline profle
Molded outside construction
Patented pin-release PLT FAT BAR system with multistrap barends
Stump nose hook with cross bar
Molded slide-in Barpad for no ride-up
Multiple leash connectors
Kiteknife and car-key front pocket
Dual density support pillow
4 way MPL bar attachments
For Sizechart click here
Oswald Smith loves design, we love Oswald Smith. Easy decision, we gave him free range to come up with a killer design for the already awesome Majestic kite harness. Butterflies, skulls and tremendous back support, What could you want more in a harness?
Please note: safety knife and handlepass loop are sold separately.
Features
Bionic Core Frame
Fix Foam
Soft neoprene edges
Battle belt
Flexcovers with integrated safety knife pocket
Adaptive leash eye 2.0 included
Suitable for Stealth bar & Acebar
Artist series
Materials
Roven composite
Who doesn't want the best of both worlds? The Star Hybrid Harness has a detachable seat, which means that you can transform this seat harness into a regular waist harness, especially when you find yourself progressing quickly. The Hybrid Harness comes with a handlepass system and Ace bar.
Features
Removable seat part
Anatomical backplate
Soft neoprene interior
Non-slip print
HP system included
Covered side parts
Ace bar
Spreaderbar protector
Battle belt waist closure
Das Riot 9 Trapez besticht durch die niedrige Outline und bietet somit außergewöhnliche Bewegungsfreiheit. Komfort wird durch Hyper_Foam Polsterung im Rückenbereich gewährleistet, ohne sich dabei mit Wasser vollzusaugen. Mit einem Flex Index von 9 gehört das Trapez zu den mittelharten Modellen der ION Kitesurftrapeze. ION's bewährte C_Bar sowie extra Kite_Knife runden dieses Gesamtpaket ab – alles was du für deine nächste Session brauchst.
For Sizechart click here
Detacheable HP System (included)
Fixtip Spreaderbarcover
Multi Use Spreaderbar
CTC Mass Reduction
Multi use spreaderbar
H20 Weightlock
EVA Grip Liner
Designed 3D Dual
Density Foam
Pre Curved Lumbar Fit
Internal 360 Smartframe
Harness multi-use