Mast Top Plate + Alu Mast 85 cm
ALU MAST
45 > 95 CM
The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.
The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.
The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).
A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
MASTS & FUSELAGES CARBONSIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90 / 105/78 / 105/90
Wenn du bereit bist für das nächste Fahrlevel sind unsere neuen Carbon Masten und Fuselages deine erste Wahl! Nach fast zwei Jahren Forschung und Entwicklung sind sie nicht nur enorm leistungsfähig, sie sind auch so konzipiert, dass sie den Einschlägen standhalten, die mit deinem steigenden Niveau einhergehen.Mit viel Liebe zum Detail, allerhand Simulationen und unzähligen Stunden auf dem Wasser wurden diese Masten und Fuselages von unserem Ingenieursteam entwickelt und von unseren Teamridern auf Herz und Nieren getestet. Wir wollten sicherstellen, dass sich unser Carbon Setup nicht nur solide anfühlet und die erwartete Leistung liefert, sondern auch den Kräften der Rider standhält, die ans Limit gehen. Fünf Mastlängen und drei Fuselages halten für jeden Foiler die passende Kombination bereit.Wähle die Carbon-Mastlänge und Fuselage je nach Fähigkeiten, Bedingungen und der bevorzugten Disziplin:Mast Optionen:• 60 cm – spezielle Größe für Flachwasser• 75 cm – All-round / Entry / Freestyle - Die ideale Größe für die meisten Wing Foiler auf Seen, großartig für den Anfang und sehr kompakt für progressive Air Moves, sowie für Prone und SUP Foiler aller Niveaus in kleinen Wellen.• 82 cm – All-round / Surf / Freestyle / Downwind - "One for all Mast" für Wing Foiler, die den perfekten Mix aus Kompaktheit für Freestyle und Länge fürs Surfen in der Welle suchen. Prone und SUP Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler.• 82 cm Fanatic x Duotone COLLAB – Surf / Freestyle - Unser High Modulus Team Edition Mast für Wing Foiler, die auf der Suche nach maximaler Leistung sind. Basierend auf dem Duotone SLS Kite-Mastprofil mit High Modulus Carbon-Layup, ist dieser Mast perfekt für den fortgeschrittenen Winger, der konstant Flügel unter 100 cm Spannweite verwendet.• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die den zusätzlichen Raum für Komfort bei Kabbelwasser, Wellengang und offenem Meer suchen. Standardgröße für Windsurf Foiler.• 105 cm – Freerace - Wind und Wing Foiler, die einen extra langen Mast suchen, um auch bei rauenBedingungen auf offener See Höchstgeschwindigkeiten zu erreichen.Fuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein spielerisches Fahrverhalten mit reaktionsschnellem Drehverhalten und viel Pop für Air Moves suchen. Fortgeschrittene Prone und SUP Foiler.• 78 cm – “All-round” – Entry / Freeride / Pump - Wing Foiler aller Niveaus, vom Einsteiger bis zum Fortgeschrittenen, mit der Möglichkeit der Anpassung an die Bedingungen und an das Fahrlevel, sowie Winger mit Race-Ambitionen. Prone, SUP und Pump Foiler, die ein einfaches und stabiles Flugverhalten mit großartigen Pumpeigenschaften suchen.• 90 cm – “Windsurf” All-round - Windsurf Foiler aller Könnensstufen, die ein einfaches und stabiles Fahrverhalten mit guter Kontrolle auch bei höheren Geschwindigkeiten suchen.
HIGHLIGHTS
Maximum freeride performance
Anhedral wing profile
Optimised low drag to lift ratio
Kite-foiling or Tow-surfing
The perfect foil you will never outgrow. Amazing top end and bottom end speed, yet playful and forgiving, the Sonar 850 is your ultimate freeride kitefoiling wing. Smooth control at both ends of the speed spectrum and an exceptionally low stalling speed allow you to master new manoeuvres quickly. A great option for tow-surfing big waves.
Maximum freeride performance
Carries the lift through all manouevres and lets you step up your foil game with ease.
Anhedral wing profile
Swept back outline allows for a more agile flight mode and roll stability during manoeuvres.
Optimised low drag to lift ratio
The 850 Front Wings foil section allows for thrilling top-end speeds combined with unbelievable low stall speeds.
DETAILS
MAXIMUM FREERIDE PERFORMANCE
Carries the lift through all manouevres and lets you step up your foil game with ease.
ANHEDRAL WING PROFILE
Swept back outline allows for a more agile flight mode and roll stability during manoeuvres.
OPTIMISED LOW DRAG TO LIFT RATIO
The 850 Front Wings foil section allows for thrilling top-end speeds combined with unbelievable low stall speeds.
CARBON SANDWICH CONSTRUCTION WITH 3K FINISH
Lightweight foam core with premium 3K Carbon finish for an optimum strength to weight ratio.
ALU MAST
45 > 95 CM
The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.
The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.
The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).
A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
Designed for our entire foil line the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 820mm mast is mostly used on bigger surf, downwinders and more advanced riding, or as a surfy option for kite foiling
Other mast sizes available:
450mm (15.6 inches)
600mm (23.6 inches)
680mm (26.6 inches)
750mm (29.5 inches)
820mm (32.2 inches)
900mm (35.4 inches)
1050mm (41.3 inches)
ALU MAST
45 > 95 CM
The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.
The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.
The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).
A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
The AXIS Red Standard Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 765mm long.
Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling. Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts
Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning)
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 600mm mast is the most common mast that you will start putting hours on. You will ride it for a while before you move up to a taller mast, when you SUP, Surf, Downwind, Wake or Kite. Some riders might never need a taller mast, depending on their style, local conditions or discipline or riding.
Other mast sizes available:
450mm (15.7 inches),
600mm (23.6 inches),
680mm (26.6 inches),
750mm (29.5 inches),
1050mm (41.3 inches)
The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders.
The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, WINGING and KITE wings.
For the BSC wings we use a refined foil section, with extensive speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, WINGING and KITE foiling. These wings are stable, fast and turn on a dime.
The 1120 and 1060 are the easiest wings for all levels, heavier riders and all rounders for WING, SUP, WAKE and PUMP. Very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 could be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher performance in a very easy to ride package.
As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil.
Compatible with the Red fuselages.
AXIS BSC 1060 Carbon Wing
Technical Data:
WINGSPAN: 1060 mm / 42 inches
MAX CHORD: 200mm / 8 inches
ASPECT RATIO: 6.51
ACTUAL AREA 1803 square cm / 278 square inches
PROJECTED AREA: 1726 square cm / 268 square inches
VOLUME: 2800 cubic cm / 171 cubic inches
Recommended use:
WING Surfing for all levels and medium + conditions. Super stable for the size
Downwinding - Medium+ conditions and intermediate+ level
SUP / Surf - Medium+ conditions and intermediate level
Wake foiling - Intermediate+ level
Pump foiling - Intermediate+ level
Windsurf foiling - Intermediate+ level
Kite foiling - Ideal for all styles, levels and conditions
Here is what the experts say:
The BSC wings are incredibly easy to ride. Bigger sizes ideal for lighter days and bigger dudes. Smaller sizes more surfy and faster. Medium AR makes them a bit slower but still faster than last years all rounds.
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
The AXIS Red Short Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 680mm long.
Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling.
Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts
Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning)
The AXIS PNG 1300 Carbon Front wing is the biggest wing of its kind on the market. There is nothing like it - The absolute Glider.
The AXIS PNG 1300, together with the 1150, 1010 and the 910, 910B and 850 form our Pump and Glide wing family.
The AXIS PNG wings are designed to be easy and early to lift for their size. The have tons of control, and feel comfortable for most levels of riding. Our Glide wings pump unreal, and glide effortlessly and endlessly. And they are fast wings, but their focus is not to be the fastest wing on the market. But instead, to be the easiest high aspect wing that almost everyone can ride, and can improve their level of riding right away.
The 1300 is the biggest wing of the PNG collection. It's actually the biggest wing across any other wing on the market with the longest wingspan in the industry. We wanted a wing that will lift very very early, and would glide endlessly, w/out slowing down.
The AXIS PNG 1300 wing was designed to dominate the smallest foiling conditions. From the lightest wind WING Surfing, to tiny bumps SUP and SURF foiling, and effortless lift behind the BOAT, the AXIS 1300 performs like no other high aspect wing ever dreamed of. The amount of glide and pumping ability of the AXIS 1300 is tremendous. This is a very high aspect ratio wing. at nearly 10 Aspect Ratio, this is a very special wing, designed for endless glides.
The AXIS PNG 1300 carbon wing connects to the red fuselages with 3 x M8, 20mm screws. At 1300mm wingspan the AXIS 1300 is a massive wing, over twice as stiff as the 1010, benefiting from the AXIS PNG rigidity and stiffness of engineering and construction.
As with every AXIS front wing, the graphics on the wings give you all possible measurements, and for 2021 we added the Aspect Ratio on the wings, so you can best compare and also quickly swap pieces or get new accessories for your foil.
AXIS PNG 1300 Carbon Wing
Technical Data:
WINGSPAN: 1300 mm / 51 inches
MAX CHORD: 180mm, 7inches
ASPECT RATIO: 9.94
ACTUAL AREA 1712 square cm / 265 square inches
PROJECTED AREA: 1700 square cm / 263 square inches
VOLUME: 1895 cubic cm / 116 cubic inches
Recommended use:
WING Surfing for all levels and the lightest possible conditions
Downwinding - Lightest wind / smaller waves
SUP / Surf - Tiny bumps and endless gliding
Wake foiling - Early lift / easiest pump
Pump Foiling - Endless
Windsurf foiling - very early and super easy lift
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate).
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase the AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
Wing // Beginner: 75/76-2400/300
Unser empfohlenes Set für jeden Wing Foil Neuling! Unglaublich gleitstabil und einfach in der Nutzung ist dieses Aero Lift 2400 Set die beste Option für schnellen Lernerfolg für jeden Rider von 60 kg aufwärts bis zu schwergewichtigen Einsteigern. Mit der soliden und langlebigen Aero AL Mast und Fuselage Kombination kannst du später einfach auf kleinere Wings aufrüsten wenn du soweit bist.
The S483 can be used with any wave wing in our collection and will allow you to shorten the turn radius while maintaining a high entry speed and releasing energy during pumping.
STABILITY
MANEUVERABILITY
TOP SPEED
PRESSURE
EASE OF USE
ALL-ROUND
This stabilizer was created to give freedom and speed to our big front wings.
The S483 can be used with any wave wing in our collection. The inverted tip design will allow you to shorten the turning radius compared to the S450 stabilizer, maintaining a high entry speed and releasing energy during pumping.
Our new A+System is taking strength and durability into the future! See this link for full details.
THE CARVING FREERIDE 2400 V2 IS A GREAT CHOICE FOR RIDERS STARTING OUT WITH ANY FOIL SPORT. ITS LARGE WINGSPAN MAKES LEARNING EASY DUE TO ITS STABILITY AND THE SLOW SAFE SPEEDS AT WHICH THE WING WILL FLY.
For intermediate riders it pumps up on larger boards in minimal swell, yet is fast enough to rip out a down wind coastal run in a good time. This wing will lift anyone and is still easy and smooth to turn for its over-size proportions. It can easily be surfed and is perfect for heavier riders in small waves.Construction
Construction is based around a high-density foam core, which is wrapped with 100% IM and High Modulus Carbon.
The main wings are shaped and refined for maximum stability and predictability at all speeds
The foil sections have been carefully designed by one of the world’s foremost sport wing designers.
DimensionsWing area: 2390cm2 (370 in2)Wingspan: 970mmWeight: 1850g*Comes complete with screws and protective cover.
713 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T6
KITE FOIL
WING FOIL
Connection SystemKraken Modular System
DisciplinesKite - Wing
Front Wing Connection TypeT6
713 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
FUSION FQR
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Patent pending Cabrinha Foil Quick Release is an innovative new tool-less mast plate that allows you to detach your foil mast from the board in seconds. The tapered engagement provides a press fit that will ensure a solid connection without any movement. Gone are the days of trying to tetris pack your foil boards to and from the beach, simply pull the release lever and the mast detaches. The FQR release attaches to all industry standard 9cm foil board track.
Features:
Cam lever - Tool less operation
Aircraft grade extruded, anodized 6061-T6 aluminium components
Lightning fast attachment
Universal 9cm mounting
Safety key engagement
tapered engagement
Anti-line snag geometry - increased safety when kiting
Precision calibration design
MASTS & FUSELAGES AL 3.0SIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90
Unsere stark verbesserten AL3.0 Masten und Fuselages sind unglaublich steif und direkt, fast 20% leichter und kommen mit verbessertem Strömungsverhalten als die Vorgängermodelle. Ein neuer Trimm macht die Foils deutlich verspielter ohne Abstriche bei der Nutzerfreundlichkeit einzugehen.Unser Team hat nicht nur monatelang auf dem Wasser getestet, die Entwickler unserer Foils haben die Kräfte, Geschwindigkeiten und unterschiedliche Anströmwinkel der verschiedenen Situationen beim Foilen analysiert und auf dieser Basis ein neues Mastprofil und Fuselages mit deutlich geringerem Widerstand entwickelt, dabei den Trimm entscheidend verbessert und das Gewicht massiv reduziert ohne Abstriche der Festigkeit des gesamten Systems zu machen. Die AL 3.0 Foils fahren sich verspielter und direkter und decken eine noch größere Bandbreite an Bedingungen und Könnenstufen ab.Wähle die Mastlänge und Fuselage entsprechend deines Fahrlevel, der Bedingungen und deiner Präferenzen:Mast Optionen:• 60 cm – spezielle Größe für flache Gewässer• 75 cm – All-round / Entry / Freestyle - Standardlänge für die meisten Wingfoiler auf Seen. Super für den Einstieg und sehr kompaktes verhalten bei Sprüngen und Rotationen für progressive Freestyler. Surf- und SUP-Foilen bei allen Könnensstufen in kleineren Wellen• 82 cm – All-round / Surf / Freestyle / Downwind - Unser neuer Allrounder-Mast für Wing Foiler, die nach dem perfekten Mix aus Kompaktheit zum Freestylen und gleichzeitig ausreichend Länge zum Wingen in Wellen suchen. Surf- und SUP-Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die nach extra Länge für Komfort in Wellen und größerer Dünung suchen. Standardlänge für Windsurf FoilerFuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein manöverorientiertes Setup mit direkten Reaktionen und hervorragendem Pop für Sprünge suchen. Fortgeschrittene Surf- und SUP Foiler• 78cm – “All-round” – Entry / Freeride / Pump - Vom Wingfoil-Einsteiger bis zum Könner, mit der Option den Back Wing entsprechend des Fahrlevels zu positionieren. Surf-, SUP- und Pump-Foiler, die nach einem einfachen Setup mit guter Kippstabilität und hervorragenden Pump-Eigenschaften suchen• 90cm – “Windsurf” – All-round - Für Windsurf Foiler aller Könnensstufen, mit einem einfachen und stabilen Flug mit viele Kontrolle auch bei höherer Geschwindigkeit
703 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T8
KITE FOIL
WING FOIL
SURF FOIL
Connection SystemKraken Modular System
DisciplinesKite - Surf - Wing
Front Wing Connection TypeT8
703 mm aluminum fuselage, with T8 front wing connection type (big chord and M8 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
653 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T6
KITE FOIL
WING FOIL
SURF FOIL
Connection SystemKraken Modular System
DisciplinesKite - Surf - Wing
Front Wing Connection TypeT6
653 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
The Sonar High Aspect Front Wing Series is engineered for the highest speed and efficiency possible across a range of disciplines – from kite foiling to prone foil surfing. With this style of wing, you need minimal pump and power to generate glide. The shorter chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability and a slightly longer radius turn than a lower aspect ratio wing of the same size. The wingtips are refined to ensure there is no ventilation when you tip breach, giving you the ability to crank tighter radius turns at higher speeds, without losing speed. The larger HA1450 is ideal for dock starts, pumping to connect wave after wave, coastal runners or stealing wakes. Downwinding: Ocean swells move faster in the open ocean – slower in shallow water or closer to the coast. The faster you move through the water, the more choice you have to choose a more efficient line. The smaller the wing, the less planing surface = less lift and higher stall speed. The HA Series Wings are designed for lighter / more experienced riders to foil in faster-moving ocean swells.
The MA1200 Front Wing is your go-to wing for when the breeze is up or for bigger waves. Balanced feel and powered-up performance, with exceptional maneuverability. Suitable for Kite, Wing, Surf and Tow Foiling.
Features
Higher speed top end performance
Extremely fast and responsive turning radius
Incredibly efficient
Insane glide and pumpability
Materials
Carbon Pre-preg
The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders.
The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, WINGING and KITE wings.
For the BSC wings we use a refined foil section, with extensive speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, WINGING and KITE foiling. These wings are stable, fast and turn on a dime.
The 1120 and 1060 are the easiest wings for all levels, heavier riders and all rounders for WING, SUP, WAKE and PUMP. Very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 would be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher performance in a very easy to ride package.
As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil.
Compatible with the Red fuselages
AXIS BSC 970 Carbon Wing
Technical Data:
WINGSPAN: 970 mm / 38.2 inches
MAX CHORD: 190mm / 7.5 inches
ASPECT RATIO: 6.27
ACTUAL AREA 1572 square cm / 244 square inches
PROJECTED AREA: 1501 square cm / 233 square inches
VOLUME: 2313 cubic cm / 141 cubic inches
Recommended use:
WING Surfing for all levels and medium + conditions. Super stable for the size
Downwinding - Medium+ conditions and intermediate+ level
SUP / Surf - Medium+ conditions and intermediate level
Wake foiling - Intermediate+ level
Pump foiling - Intermediate+ level
Windsurf foiling - Intermediate+ level
Kite foiling - Light wind - All levels
Here is what the experts say:
The BSC wings are incredibly easy to ride. Bigger sizes ideal for lighter days and bigger dudes. Smaller sizes more surfy and faster. Medium AR makes them a bit slower but still faster than last years all rounds.
Rear Wing Options:
500mm Carbon for max control, stability and slower ride (entry levels)
460mm Carbon for high speed and loose turning (advanced)
420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.
440mm Carbon for control and stability (all levels)
400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate)
390mm Carbon for Wing and Surf with good turning control and additional glide
370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all
340mm Carbon for even looser feel and even less drag and more speed. (advanced)
500mm Anhedral Carbon specific to windsurf foiling
When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
719,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...