The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.
FUSION X-SERIES WINGS
HIGH PERFORMANCE
Sizes: X950 / X1300 / X1600 / X1950
Das Highlight der letzten 5 Jahre war die Entwicklung von Hybrid- und Crossover-Technologien, die mittlerweile in jeglichen Sportarten zu finden sind. Nirgendwo wird dies deutlicher als beim Foilen. Hydrofoilen ist heute zum gemeinsamen Nenner aller Surf- und Windsportarten geworden.
Aus diesem Grund benötigt es ein Hydro Wing-Set, das nicht nur zwischen diesen Sportgenres mühelos wechseln kann, sondern auch in der Lage ist, in allen Disziplinen kompromisslos zu performen. Das Design der X Series™ erkennt und nutzt die wichtigsten Features, die beim Hydrofoilen benötigt werden. Auftrieb, Effizienz und Kontrolle sind die drei Treiber, die die hohe Performance und den geschmeidigen Lauf der X Series ausmachen.
Durch die feine Abstimmung von Outline und Flügelprofil liefert die X Serie einen sanften Lift und eine stabile Flugphase, die präzise Manöver und ein hohes Maß an Kontrolle erlauben.
Die Effizienz der X Serie wird durch unser völlig neues Cab Fusion Mast und Fuselage-Ecosystem verbessert. Beim Cab Fusion handelt es sich um ein von Grund auf neu konzipiertes System, bei dem jeglicher unerwünschte "Spielraum" beseitigt wird, der durch Strömungskräfte zwischen Wings und Fuselage normalerweise entsteht. Die daraus resultierende verbesserte Steifigkeit und der minimierte Wasserwiderstand machen die Wings der X Serie zu einem völlig neuen Kaliber an Hydrofoils.
Die X Series ist in 4 Größen erhältlich, um einen unglaublich großen Bereich an Einsatzmöglichkeiten und Fahrergewichtsklassen abzudecken. Wenn du mehr als eine Sportart ausübst, kannst du dir sicher sein, dass sich das erstaunliche Performanceniveau der Foils über alle Genres hinweg ziehen wird.
DESIGN PROFILE
Gekrümmtes LE, gerades TE, schlankes, nach vorn geneigtes Profil, mäßiger negativer V-Winkel.
WING FEATURES
Lockeres und agiles Fahrgefühl für eine überragende Manövrierbarkeit.
Optimale Effizienz & Lift
Integrierte Fuselage mit konischem Mast fit
Überlegene Torsionssteifigkeit und minimaler Strömungswiderstand
Volle Prepreg Carbon Konstruktion für ultimative Performance
EPS-Kern für perfektes Verhältnis von Festigkeit zu Gewicht
Effizienter Lift durch moderatem negativen V-Winkel
Fehlerverzeihend und vorhersehbarer, früher Lift dank nach vorn geneigtem Profil
TECH SPECS
X950- 950cm^2, WS 630mm, AR 4.2, Vol 1.18L
X1300- 1300cm^2, WS 780mm, AR 4.7, Vol 1.6L
X1600- 1600cm^2 WS 900mm, AR 5.05, Vol 2L
X1950- 1950 cm^2, WS 1000mm, AR 5.13, Vol 2.5L
Im Set inkludiert:
Front Wing, Wing Covers.
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all.
Features
Recommended with S215 Stabilizer
Super low stall speed
Effortless pumping
Surf-style turning (smooth rail to rail and surf yaw snap
Forgiving and accessible for faster progression
Materials
Pre-Preg Carbon
Titanium Screws
653 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T6
KITE FOIL
WING FOIL
SURF FOIL
Connection SystemKraken Modular System
DisciplinesKite - Surf - Wing
Front Wing Connection TypeT6
653 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
The AXIS 400 Carbon Rear Wing is the carving specialist. Even looser than the 440 rear wing, it's the most turny and performance oriented rear wing on our collection.
A must have with the 750 and 680 front wings, but also works miracles with the bigger wings, making the ride more playful and high performing. And when combined with the ULTRA Short Red fuselage then your ride gets looser than ever!
When you purchase the AXIS 400 carbon rear wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
WINGSPAN: 400 mm / 15.75 in
CHORD: 90 mm / 3.54 in
ASPECT RATIO: 5.79
ACTUAL AREA : 291.18 cm² / 45.13 IN²
PROJECTED AREA: 276.54 cm² / 42.86 IN²
VOLUME: 175.35 cm³ / 10.70 IN³
Assembly
What screws to mount wing to the fuselage:
Rear Wing
Front Screw
Rear Screw
500mm x 90mm
M6 x 25mm
M6 x 25mm
440mm x 90mm
M6 x 25mm
M6 x 25mm
400mm x 90mm
M6 x 25mm
M6 x 25mm
460mm x 60mm
M6 x 22mm
M6 x 22mm
400mm x 60mm
M6 x 22mm
M6 x 22mm
420mm x 60mm
M6 x 22mm
M6 x 22mm
380mm x 60mm
M6 x 22mm
M6 x 22mm
390mm x 80mm
M6 x 25mm
M6 x 25mm
370mm x 80mm
M6 x 25mm
M6 x 25mm
340mm x 80mm
M6 x 25mm
M6 x 25mm
500mm x 90mm
M6 x 25mm
M6 x 25mm
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 750mm mast is mostly used on bigger surf, downwinders and more advanced riding or as a surfy option for kite foiling.
Other mast sizes available:
450mm (15.7 inches),
600mm (23.6 inches),
680mm (26.6 inches),
750mm (29.5 inches),
1050mm (41.3 inches)
MASTS & FUSELAGES AL 3.0SIZES: (MAST/FUSELAGE SETS) 60/68 / 60/78 / 60/90 / 75/68 / 75/78 / 75/90 / 82/68 / 82/78 / 82/90 / 90/68 / 90/78 / 90/90
Unsere stark verbesserten AL3.0 Masten und Fuselages sind unglaublich steif und direkt, fast 20% leichter und kommen mit verbessertem Strömungsverhalten als die Vorgängermodelle. Ein neuer Trimm macht die Foils deutlich verspielter ohne Abstriche bei der Nutzerfreundlichkeit einzugehen.Unser Team hat nicht nur monatelang auf dem Wasser getestet, die Entwickler unserer Foils haben die Kräfte, Geschwindigkeiten und unterschiedliche Anströmwinkel der verschiedenen Situationen beim Foilen analysiert und auf dieser Basis ein neues Mastprofil und Fuselages mit deutlich geringerem Widerstand entwickelt, dabei den Trimm entscheidend verbessert und das Gewicht massiv reduziert ohne Abstriche der Festigkeit des gesamten Systems zu machen. Die AL 3.0 Foils fahren sich verspielter und direkter und decken eine noch größere Bandbreite an Bedingungen und Könnenstufen ab.Wähle die Mastlänge und Fuselage entsprechend deines Fahrlevel, der Bedingungen und deiner Präferenzen:Mast Optionen:• 60 cm – spezielle Größe für flache Gewässer• 75 cm – All-round / Entry / Freestyle - Standardlänge für die meisten Wingfoiler auf Seen. Super für den Einstieg und sehr kompaktes verhalten bei Sprüngen und Rotationen für progressive Freestyler. Surf- und SUP-Foilen bei allen Könnensstufen in kleineren Wellen• 82 cm – All-round / Surf / Freestyle / Downwind - Unser neuer Allrounder-Mast für Wing Foiler, die nach dem perfekten Mix aus Kompaktheit zum Freestylen und gleichzeitig ausreichend Länge zum Wingen in Wellen suchen. Surf- und SUP-Foiler in mittelgroßen Wellen. Freestyle Windsurf Foiler• 90 cm – Freeride / Surf / Downwind - Wing Foiler, die nach extra Länge für Komfort in Wellen und größerer Dünung suchen. Standardlänge für Windsurf FoilerFuselage Optionen:• 68 cm – “Advanced” – Surf / Freestyle - Fortgeschrittene Wing Foiler, die ein manöverorientiertes Setup mit direkten Reaktionen und hervorragendem Pop für Sprünge suchen. Fortgeschrittene Surf- und SUP Foiler• 78cm – “All-round” – Entry / Freeride / Pump - Vom Wingfoil-Einsteiger bis zum Könner, mit der Option den Back Wing entsprechend des Fahrlevels zu positionieren. Surf-, SUP- und Pump-Foiler, die nach einem einfachen Setup mit guter Kippstabilität und hervorragenden Pump-Eigenschaften suchen• 90cm – “Windsurf” – All-round - Für Windsurf Foiler aller Könnensstufen, mit einem einfachen und stabilen Flug mit viele Kontrolle auch bei höherer Geschwindigkeit
SURF / FREESTYLE / PRONE / KITE
Aufbauend auf dem Erfolg unserer Carve Wings, war es das Ziel für den Carve 2.0, die Leistung dieser Mid Aspect Wings weiter zu optimieren.
Unsere Teamfahrer wollten noch mehr Gleitleistung, Speed und geringeren Widerstand. Das alles bei verbesserter Manövrierbarkeit und Beibehaltung der altbekannten Kontrolleigenschaften bei hoher Geschwindigkeit.
Wir haben entschieden, ganz von vorne anzufangen und so ziemlich alle Designparameter zu ändern: Höhere Streckung, neue Kontur und höhere Aspect Ratio, neue Outline und Twist entlang des Wings.
Und nicht nur das: Jede einzelne Größe wurde individuell auf den jeweiligen Einsatzbereich abgestimmt.
Der größere 1430 hat zum Beispiel das geringste Aspektverhältnis und das dünnste Profil, für maximale Manöverfähigkeit und geringstmöglichen Strömungswiderstand. Auf der anderen Seite hat unser 850 die höchste Aspect Ratio und das dickste Profil, um den Auftrieb zu verbessern und den Strömungsabriss bei einem so kleinen Flügel zu verzögern.
Der Carve 2.0 ist der ideale Flügel, wenn du "echte Wellen" ansteuern willst. Was er im Vergleich zum Free oder Glide an Gleitleistung einbüßt, macht er mit höherer Endgeschwindigkeit und viel mehr Manövrierbarkeit auf der Welle wieder wett.
Der Carve 2.0 ist auch die bevorzugte Wahl unseres Freestyle-Teams bei der GWA World Tour. Mit diesen Wings gehen die Rider mit mehr Speed und explosivem Pop in die Jumps. Das mittlere Aspektverhältnis bedeutet auch, dass die harten Landungen die Ausrüstung weniger beanspruchen.
Durch die mittlere Aspect Ratio eignet sich der Carve 2.0 auch sehr gut zum Kite Foilen, wo sich die Rider aggressiver auf den Mast stützen können, ohne dass die Wing Tips aus dem Wasser ragen.
Wenn du als fortgeschrittener Winger einen Flügel sucht, der sich aufregend verspielt fährt und in sehr vielen Bedingungen zu Hause ist, dann ist der Carve 2.0 die Antwort! Vom Wing Foilen in großen Wellen bis hin zu High Speed Runs auf dem Kite Foil – der Carve 2.0 deckt vieles ab!
FUSION V-SERIES TAIL STABILIZERS
HIGH ASPECT
SIZES: 180 / 230 / 285
One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability.
Features:
Optimal efficiency and maneuverability
Flat center, to downward tips, for perfect balance between locked-in feel and agility
Single molded components for minimal drag
Full prepreg carbon construction
PMI core for superior strength to weight ratio
180 cm², WS-340, AR-6.42
230 cm², WS-400, AR-6.96
285 cm², WS-450, AR-7.11
Set Includes:
Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws, {(ear fuselage not included)
713 mm Fuselage - Kraken Modular SystemFront Wing Connection Type: T6
KITE FOIL
WING FOIL
Connection SystemKraken Modular System
DisciplinesKite - Wing
Front Wing Connection TypeT6
713 mm aluminum fuselage, with T6 front wing connection type (small chord and M6 screws).
Thanks to the connection standard to the mast, the Kraken Modular System, each Kraken fuselage is compatible with all masts of the same range.
The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant, while maintaining performance.
Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.
Our new A+System is taking strength and durability into the future! See this link for full details.
THE CARVING FREERIDE 2400 V2 IS A GREAT CHOICE FOR RIDERS STARTING OUT WITH ANY FOIL SPORT. ITS LARGE WINGSPAN MAKES LEARNING EASY DUE TO ITS STABILITY AND THE SLOW SAFE SPEEDS AT WHICH THE WING WILL FLY.
For intermediate riders it pumps up on larger boards in minimal swell, yet is fast enough to rip out a down wind coastal run in a good time. This wing will lift anyone and is still easy and smooth to turn for its over-size proportions. It can easily be surfed and is perfect for heavier riders in small waves.Construction
Construction is based around a high-density foam core, which is wrapped with 100% IM and High Modulus Carbon.
The main wings are shaped and refined for maximum stability and predictability at all speeds
The foil sections have been carefully designed by one of the world’s foremost sport wing designers.
DimensionsWing area: 2390cm2 (370 in2)Wingspan: 970mmWeight: 1850g*Comes complete with screws and protective cover.
The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear stabilisers to maximise this newfound speed advantage. With minimal span changes (just 7mm between them) and drastic chord reduction down to 55, 50, 45, 40 and 35mm, we found positive gains in speed, control, balance and feel. The Skinnies have inherited many of the same characterises that make our Progressive range so popular, like the precise feel and seamless turn initiation plus recovery. They are very low drag and free up speed and turning. Heavier riders and those less experienced will gravitate to the 55, 50 and 45 chord models, those who are lighter and or have greater experience might opt to reduce drag in the extreme and try the 40 or 35mm chord options.The Skinny rear wings inspire confidence by providing a more comfortable ride at speed, they reduce the normal buildup of front foot pressure that can be associated with high-speed foiling. They are a perfect match to ARTPRO foils, but keep in mind, your HPS, ART, PNG and even BSC, will equally benefit from the Skinny high-performance DNA.
Freefoil | SurfBalanced by design.Even, predictable flight. Easy, steady takeoffs. And super smooth turns. The larger size imparts a more balanced flight behavior at all speeds. The dihedral curvature lets you tilt the foil into turns like a skateboard for a smoother cruising behavior. Gybes, tacks, 360s, and transitions are much easier since you can feel your back wing and use it to pivot the foil. A high-quality lightweight carbon and PU foam construction is more complex to build than a pure carbon wing but the weight savings is worth it.Delivery: Stabilizer only.Sizes:Stabilizer: 300cm2Features:
PU CARBON SANDWICH: Very light and responsive.
DIHEDRAL STABILIZER: Smooth, balanced gybes.
Red Advance Fuselage (+40)
If you're into pushing the envelope in Prone, SUP, Wake, Wing or Pump, these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected feeling on the larger PNG and BSC front wings? Our new Red Advance fuselage is for you.In three different sizes you get tons of options to fine tune your setup. This design sees the mast position moved 40mm closer to the front foil, opening up entirely new options for performance.The regular Red fuselages are perfectly suited to the majority of riders across all disciplines. By no means are these new Red Advance fuselage intended to replace them. They just provide options for performance and a more connected feel when pushing the limits.
As the mast position on the Red Advance Fuselage is moved closer to the front wing, the effective length of the fuselage behind the mast is now slightly increased (by 40mm).
When choosing your Red Advance Fuselage, it’s advisable to possibly opt for a length shorter than you are currently using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead.
The Red Advance fuselage is available in Short, Ultrashort and Crazyshort sizing. Compatible with all the front wings that use the red fuselage. Compared to the regular Red fuselage range, these 3 new little siblings provide a looser, smoother transition from side-to-side. The sensation our testers liken it to is similar to the sensation of moving fins forward in the tracks on a surfboard. Initiating turns becomes easier, which is great in the surf.
In an effort to reduce the use of cardboard and excess packing material, all the Black and Red ADVANCE fuselages are shipping with the matching new fuselage protective covers. Better for your gear. Better for the environment.
Whether winging at speed, laying deep carves on a wave face or pumping and linking up swells on a downwinder – AXIS Power Carbon enters a new realm of control and connection between board and foil. It’s the next giant leap in foiling performance.
High aspect foils = higher loads on masts
During early ART foil testing, our research team quickly realized that higher aspect ratios and broader foil spans applied more bending and twisting forces to the mast. So while ART foils were a game-changer even on our existing masts, we knew there was still huge untapped potential to be realized.
And so began a whole new development project, and we couldn’t be more excited at the result. With a new power profile and carefully considered material selection and placement, AXIS Power Carbon delivers both superior stiffness with next-level strength.
Opting for a one-piece design, we avoided the flow/drag and jointing issues associated with multi-part mast constructions.
Additionally and more importantly, testing proves that maximum loading is concentrated close to the baseplate and this is why the mast tapers thicker at this point to handle the loads. Any joins or two-piece construction at this high load area would destroy the integrity of the mast.
A revised fuselage connection design maximizes the size of the attachment point to achieve a perfect fit to the fuselage reducing any chance of unwanted movement.
The result is a positive connected feel, direct drive, immediate feedback and ultimate control. High aspect foils perform as they should, feel and control enter an entirely new realm.
The new High Modulus Carbon fibre used in our mast layup is considerably stiffer and stronger than the regular carbon fibre used in conventional constructions. Innovative, considered and balanced placement of materials in our proprietary production process paired with rigorous testing has delivered a breathtaking performance leap.
Ride characteristics are so game-changing, that it’s been a struggle to get our team riders to return the prototypes after testing!
Feedback featured claims like ‘a way more positive and connected feel’, ‘immediate feedback’ and ‘ultimate control’.
Choose your Power level
Our new masts are available in two models, the Power Carbon and Power Carbon - High Modulus, the latter providing additional strength and 35% more bend resistance than our industry-leading 19mm aluminium mast. The High Modulus will be the mast of choice for the most discerning rider seeking ultimate performance, and heavier riders using our larger span foils.
With AXIS Power Carbon masts, riders will finally be at one with the foil.
AXIS Power Carbon Masts have a new and greatly improved base connection design. While fully compatible with all existing Red & Black fuselage, a new installation technique/method is required, this involves simply inserting the mast leading edge first into the fuselage opening, then rotating the trailing edge down. Removal is done in reverse, trailing edge rotates out first... super simple!
Remember use only 30mm M8 bolts to attach fuselage to Power Carbon masts
Freefoil | SurfKeep your precious foil looking new. The set includes a Tool Pouch and cover for the Front Wing, Stabilizer, Fuselage, 71 or 92cm Mast, and Mast Base. The 420 denier Nylon covers fit neatly in the optional Foil Bag that’s designed for traveling and busy airports. Five-millimeter closed-cell foam padding and additional edge polyester webbing protect all trailing edges. The handy tool pouch keeps all your hardware and tools in one place. Even the mast cover features a screw pocket. Now, you're covered.Delivery:Component covers and tool pouch.Measurements:
Front Wing Cover 1250: ca. 80 x 32 cm / ca. 32 x 12 inches
Stabilizer Cover 300: ca. 45 x 18 cm / ca. 18 x 7 inches
Fuselage Cover 70: ca. 77 x 10 cm / ca. 30 x 4 inches
Mast Cover 92: ca. 98 x 17 cm / ca. 38 x 7 inches
Mast Cover 71: ca. 78 x 17 cm / ca. 31 x 7 inches
Mastbase Cover: ca. 26 x 13 cm / ca. 10 x 5 inches
Tool Pouch S: ca. 25 x 13 x 8cm / ca. 10 x 5 x 3 inches
Features:
5MM PADDING: Thick padding for maximum protection.
420 DENIER NYLON: Tough. Durable.
FOIL BAG READY: Designed to fit into the optional Foil Bag.
FUSION HYBRID BASE KIT
HIGH PERFORMANCE - DURABILITY
Sizes: 70 / 90 CM MAST
Das völlig neue Fusion Ecosystem setzt einen neuen Maßstab für Cabrinhas Foil Design und Herstellungsmöglichkeiten. Leistung und Funktion stehen im Mittelpunkt des Designprozesses.
Jedes Einzelteil wurde hinsichtlich seiner Komponenten, als auch seiner Verbindungsstellen neu optimiert. Dabei besteht die Möglichkeit jedes Teil im System in sich auszutauschen. Diese mühelose einfache Handhabung ermöglicht zusammen mit der neuen X:Series Wing Range somit verschiedenste Foil Setups, die sich auf Deine Bedürfnisse individualisieren lassen, egal ob du mit Kite, Wing, Paddel oder als Surf/Prone unterwegs bist.
Wir laden dich mit Stolz ein, dir deine Traumsession selbst zusammenzustellen...
Das Fusion Hybrid ist eine effiziente Zusammenstellung an erstklassigen Komponenten, die in einer unglaublich steifen und hydrodynamischen Foil-Konstruktion resultieren. Das Fusion Hybrid lässt sich nahtlos in alle 9cm-Foil-Boxen nach Industriestandard integrieren.
Die neu gestaltete Fuselage-Verbindung ermöglicht es, den Mast fest und sicher zu montieren; und kann so den vertikalen und horizontalen Kräften widerstehen, die in allen Foildisziplinen auftreten.
DESIGN PROFILE
Haltbarkeit, Langlebigkeit und unübertroffene Steifigkeit in einem Alu Setup.
MAST FEATURES
Feste Top Plate mit m8 Slots für eine einfache Montage
3-Schraubenverbindung für extrem hohe Steifigkeit
Eloxiertes Aluminium 6061-T6 in Luftfahrt-Qualität
Konische Präzisions-Fuse-to-Mast Verbindung für optimale Steifigkeit
Helicoil-Inserts für minimierte Korrosion und lange Lebensdauer
Wasserdichte Hohlkonstruktion für optimales Verhältnis von Festigkeit zu Gewicht
FUSELAGE FEATURES
CNC- bearbeitetes, eloxiertes Aluminium 6061-T6 in präziser Luftfahrt-Qualität
Helicoil-Inserts für minimierte Korrosion und lange Lebensdauer
Auswechselbare Rear Fuselage für optimale Leistung und einfaches Reisen
343mm Rear Fuselage für eine überragende Manövrierfähigkeit
Ergänzend zu erwerben: 416mm Fuselage für eine perfektes Balance von Stabilität und Benutzerfreundlichkeit
Versenkte Montagefläche für Stabilizer sorgt für minimalen Luftwiderstand
Im Set inkludiert:
Mast, Rear Fuselage, Travel Bag, 8pcs m6 ss316 torx TiN-beschichtete Schrauben und Torx Tool.
FUSION FQR
HIGH PERFORMANCE - DURABILITY
SIZES: ONE SIZE
The Patent pending Cabrinha Foil Quick Release is an innovative new tool-less mast plate that allows you to detach your foil mast from the board in seconds. The tapered engagement provides a press fit that will ensure a solid connection without any movement. Gone are the days of trying to tetris pack your foil boards to and from the beach, simply pull the release lever and the mast detaches. The FQR release attaches to all industry standard 9cm foil board track.
Features:
Cam lever - Tool less operation
Aircraft grade extruded, anodized 6061-T6 aluminium components
Lightning fast attachment
Universal 9cm mounting
Safety key engagement
tapered engagement
Anti-line snag geometry - increased safety when kiting
Precision calibration design
The S483 can be used with any wave wing in our collection and will allow you to shorten the turn radius while maintaining a high entry speed and releasing energy during pumping.
STABILITY
MANEUVERABILITY
TOP SPEED
PRESSURE
EASE OF USE
ALL-ROUND
This stabilizer was created to give freedom and speed to our big front wings.
The S483 can be used with any wave wing in our collection. The inverted tip design will allow you to shorten the turning radius compared to the S450 stabilizer, maintaining a high entry speed and releasing energy during pumping.
280,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...