FUSION H TAIL STABILISER
HIGH ASPECT FOIL
HS180
DESIGN
Geschwungene Outline, gerade Hinterkante, schlankes Draft-Forward-Profil, moderate Anhedrale (negative V-Form)
PROFIL
Vielseitiges, effizientes, schnelles High-Performance-Wing-Set
WING FEATURES
Optimale Effizienz und Manövrierbarkeit
Flacher Mittelbereich, nach unten gezogene Tips – perfekte Balance aus Halt und Agilität
Nahtlos geformte Einzelteile (single molded) für minimalen Widerstand
Vollcarbon-Prepreg-Konstruktion
PMI-Core für optimales Härte-Gewichtsverhältnis
Im Set enthalten: Stabilizer, Wing-Covers, 2 Stk. m6 ss316 Torx titanbeschichtete Schrauben
Als nahtlos geformte Einzelkomponente für die Fuselage bietet der HS180-High-Aspect-Stabiliser einzigartige Effizienz und Stabilität. Präzise auf sämtliche Wings der H- und X-Series abgestimmt, garantiert er perfekte Kontrolle bei verschiedensten Drehwinkeln.
Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 5´0". Für Boardgröße von ca. 155cm x 68cm
Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern. Größe 5´4". Für Boardgröße von ca. 165cm x 70cm
Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 5´8". Für Boardgröße von ca. 175cm x 76cm
Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern Größe 6´3". Für Boardgröße von ca. 193cm x 76cm
Die Concept X Boardbags aus der F-line Serie, speziell geschnitten für Wing foil Boards, haben eine dicke 6mm Polsterung, ideal für den Autotransport zum Spot. Zusätzlich ist eine superdicke 12mm Polsterung an nose und tail eingearbeitet. Die Kante entlang des Reißverschlusses ist mit einem Kantenschutz ausgestattet. Die Bag verfügt über eine große Öffnung für den Transport mit montiertem Foil. Die Unterseite ist aus UV-reflektierendem Silbergewebe zum Schutz des Boards gegen Überhitzung, die Oberseite aus strapazierfähigem Nylon-Gewebe. Board und Bag nicht in der Sonne lagern. Größe 6´8". Für Boardgröße von ca. 205cm x 78cm
Coiled 7mm thick calf leash provides secure connection to your foilboard. The comfortable, no-slip calf cuff helps keep the cord above the water, reducing drag and tangles with your foil system.
Our new high-strength pre-preg carbon fuselage is strong, durable and corrosion resistant, and weighs ~50% less than the alloy version, with equal strength and stiffness. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. The forgiving longer C700 fuselage is ideal for wing-foiling or learning to foil, offering greater stability and more control.
Features
High-performance carbon pre-preg construction
Weighs ~50% less than the alloy version with equal strength and stiffness
GeoLock tapered geometry locking system for optimised load bearing connection
Hydrodynamically-optimised shape for minimal resistance
Compatible with all Sonar Masts
Compatible with all Sonar Front Wings
Available in C600 or C700 sizes
HIGHLIGHTS
Lightwind Wing Foiling
Reflexed technology for stability and speed
Self-trimming
WHAT RIDERS SAY
"This is the easiest to ride hydrofoil I’ve ever been on in my life." - George Hradil
Wing / SUP / Surf
The new 2200R reflexed wing is brilliant for lightwind wing-foiling. Unbelievable stability and slow stall speed through the turn makes learning gybes and tacks easier, giving newer riders confidence to try more manoeuvres and progress quickly. Smooth carvy turns in prone for heavier riders and in SUP foiling. Touchdowns are a breeze. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 2200R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 2200R feels smaller than it is in terms of speed range and responsiveness.
Lightwind Wing Foiling
A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling
Reflexed technology for stability and speed
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing.
Self-trimming
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
DETAILS
INCREDIBLY STABLE
Gives newer riders confidence to try more manoeuvres and progress quickly
PRE-PREG CARBON TECHNOLOGY
Ultimate high-performance composite material
LIGHTWIND WING FOILING
A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling
REFLEXED TECHNOLOGY FOR STABILITY AND SPEED
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size.
SELF-TRIMMING
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL
The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.
The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.
To assemble and disassemble the mast very easily, keeping the nuts always in the same correct position.
Quick mounting kit allows to assemble and disassemble the mast very easily, keeping the nuts always in the same correct position for a perfect fit every time.
HIGHLIGHTS
Performance crossover kite/surf/wing foil
Reflexed technology for stability and speed
Self-trimming
WHAT RIDERS SAY
"That feel... relax, glide. It’s a new day so enjoy it." - Daniel Kereopa
Kite / Surf / Wing / SUP / Wake
The Sonar 1500R is a true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R is great for prone foil surfing in medium to large waves, has a smooth carvy feel and fits nicely in the pocket. Its predictable lift gives you time to find a comfortable stance without fighting to keep the nose down as the foil accelerates. So you’re able to remain in the same position over the entire speed range. The balance of the foil system means you can place your back foot further behind the mast, letting you ride the board more like a shortboard. Our new, specialised reflexed-camber foil section design gives the wing pitch stability and prevents your board’s tendency to nose up strongly when you first get going. Thus, it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness. A reflexed wing gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size.
Performance crossover kite/surf/wing foil
A true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R has a smooth carvy feel and fits nicely in the pocket.
Reflexed technology for stability and speed
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment.
Self-trimming
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
TIGHT CARVING AND SNAPPY TURNS
Low to medium aspect ratio swept wing for maximum fun on and off the waves, with a low stall speed.
PRE-PREG CARBON TECHNOLOGY
Ultimate high-performance composite material
PERFORMANCE CROSSOVER KITE/SURF/WING FOIL
A true crossover wing with real performance across every foiling discipline. So stable, you’ll feel like you’re like standing on the ground. The 1500R has a smooth carvy feel and fits nicely in the pocket.
REFLEXED TECHNOLOGY FOR STABILITY AND SPEED
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size.
SELF-TRIMMING
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
MASSIVE RANGE, LOW STALL SPEED AND INCREDIBLE CONTROL
The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.
Made to be as light as possible AND super comfy - with our new pressed memory foam, they come with our Titanium washers and 316L screws. Price is for 1 Footstrap.When fitting, it's important that the washer is properly tightened. The memory foam needs to be fully compressed. Our Titanium hex washer is designed with a recessed underside to press into the memory foam and clamp the straps internal webbing to the board.
Make sure you do these up tight. The Washer needs to be the strength point.The washer outline and recesses should be imprinted into the memory foam if removed.
FUSION ALLOY MAST
FOIL
40cm 70cm 90cm
DESIGN PROFILE
Strapazierfähiges, langlebiges Setup aus Metalllegierung mit einzigartiger Festigkeit
RIDER PROFIL
Für Rider, die ein vielseitiges und ultrasteifes Foil-System suchen
MAST FEATURES
3-Schrauben-Connection für höchste Stabilität
Anodisiertes 6061-T6-Aluminum in Luftfahrt-Qualität
Präzise verlaufende Fuselage-Mast-Verbindung für optimale Stabilität
Helicoil-Inserts für minimierte Korrosion und lange Haltbarkeit
Wasserdichte, hohle Bauweise für optimales Stabilitäts-Gewichtsverhältnis
Der Fusion Alloy-Mast besteht aus stranggepresstem Aluminium in Flugzeugqualität, was zu einer unglaublich steifen und hydrodynamischen Struktur führt. Helicoil-Einsätze verhindern Salzwasserkorrosion an den Verschraubungspunkten. Der Mast lässt sich nahtlos in alle 9-cm-Industriestandard-Foilboxen integrieren.
HIGHLIGHTS
High lift, low drag and fast upwind
High performance glide
Prepreg carbon technology
WHAT RIDERS SAY
"The big function of the High Aspect wing is upwind performance - it’s perfect for wingfoiling in flat or choppy water." - George Hradil
Wing / SUP
The new HA1450 is the bigger brother of the HA1250, designed for a heavier rider or lighter wind days. Highly efficient with great lift, speed, glide and pumpability in flat or choppy water. The HA1450 has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size.
High lift, low drag and fast upwind
Generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size.
High performance glide
When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay.
Prepreg carbon technology
Ultimate high-performance composite material
DETAILS
UPWIND SPEED AND EFFICIENCY FOR WINGFOILING
The biggest single thing that our high aspect front wing brings to the table for wing-foiling is windward performance. These wings beat upwind like nothing else.
HIGH LIFT, LOW DRAG AND PUMPABILITY
The high aspect Sonar Wing has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size.
HIGH PERFORMANCE GLIDE
When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay.
PREPREG CARBON TECHNOLOGY
Ultimate high-performance composite material
HIGHLIGHTS
Performance crossover wing for heavier riders or lighter winds
Reflexed technology for stability and speed
Self-trimming
WHAT RIDERS SAY
"Excellent for kiting or surfing and good for winging." - George Hradil
Wing / Surf / SUP / Kite / Wake
The new reflexed 1850R front wing gives you impressive control throughout the entire speed range, with extreme top-end speeds for such a large wing and an unbelievably low stall speed. Also a true crossover wing, the 1850R has more lift than the 1500R. In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability and prevent your board’s tendency to nose up strongly when you first get going. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 1850R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 1850R feels smaller than it is in terms of speed range and responsiveness.
Performance crossover wing for heavier riders or lighter winds
In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able.
Reflexed technology for stability and speed
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing.
Self-trimming
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
DETAILS
PRE-PREG CARBON TECHNOLOGY
Ultimate high-performance composite material
PERFORMANCE CROSSOVER WING FOR HEAVIER RIDERS OR LIGHTER WINDS
In smaller to medium waves, prone foil surfers can perfect shorter radius surf-style turns with ease. Great for wing-foiling in all conditions and perfect for learning to foil, the 1850R is also still kite-able.
REFLEXED TECHNOLOGY FOR STABILITY AND SPEED
Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size.
SELF-TRIMMING
The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave.
MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL
The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 450mm foil mast is ideal for your first flights, while you are learning how to start to foil. Most riders spend only a few hours or less on the shortest foil mast we make (450mm) before they graduate to the longer foil masts.
Other mast sizes available:
450mm (15.6 inches)
600mm (23.6 inches)
680mm (26.6 inches)
750mm (29.5 inches)
820mm (32.2 inches)
900mm (35.4 inches)
1050mm (41.3 inches)
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 900mm mast is the choice of big wave enthusiasts and tow-ins, when combined with the 680mm front wing. It's also the choice of downwinder pros when competing in open ocean swell. The AXIS 900mm mast is the main size mast for wind foilers and kite foilers, when they reach they are are not beginners any longer.
Other mast sizes available:
450mm (15.6 inches)
600mm (23.6 inches)
680mm (26.6 inches)
750mm (29.5 inches)
820mm (32.2 inches)
900mm (35.4 inches)
1050mm (41.3 inches)
Mast Top Plate + Alu Mast 75 cm + Titan Mast Foot
ALU MAST
45 > 95 CM
The F-ONE aluminium mast can be used for all disciplines, kite, surf, stand up paddle, wing foil and windsurf. The profile is extruded with precision from 6063 aluminium block.
The shape of its section benefits from our years of experience in kitefoiling to provide the best gliding feel while keeping the strength up and the weight down. It comes with two stainless steel helicoil inserts at the bottom and at the top to fasten the connecting parts and is therefore fully modular.
The aluminium mast can be used on every foil of the range and it is very easy to jump from one length to another (45 / 55 / 65 / 75 / 85 / 95 cm).
A number of parts are available for board connection (Plate, KF, Deep KF, Tuttle).
Q01K NOT INCLUDED (KRAKEN QUICK RELEASE)
Kraken Mast Plate
Kraken Modular System
ALL-ROUND
Connection SystemKraken Modular System
The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K).
The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle.
This Plate has been designed for maximum lightness and strength. It has been milled directly in our factory starting from premium aluminum ingots and then it has been deeply anodized by certified partners.
The Kraken Mast Plate also makes it possible to upgrade your set-up with the quick release system (Q01K), thanks to which you can assemble and disassemble your hydrofoil in a few seconds, without losing the configuration on the board.
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our 19mm masts are 224% stiffer than the 15mm thick masts (most other foil companies use). It's even stiffer than any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
Do you find the 750mmm just a bit too short for your local spot, but the 900mm is a bit too long? Then the 820mm is certainly the right length for you. Perfect for higher performance riding on Surf, tow-in, Wake, Pump, SUP, Wing or Kite.
Other mast sizes available:
450mm (15.7 inches),
600mm (23.6 inches),
680mm (26.6 inches),
750mm (29.5 inches),
1050mm (41.3 inches)
ULTRALIGHT STRAPS
SURF / FOIL BOARDING
SIZES: ONE SIZE
Designed for riders looking for a great, user friendly and simple strap for foiling or kite surfing, the Ultralight strap is a minimal coverage strap that provides maximum board connection. The comfortable and lightweight footstrap keeps you locked in with a direct feel. The Ultralight non-adjustable strap gives you the perfect fit and foot placement stability when you ride.
Features:
Ultra lightweight construction
Maximum comfort
Minimal water absorption
Molded dual density foam prevents collapsing
3 strap Option with included hardware options for both Foam Core and Wood Core Boards.
2 Strap Option with included hardware options for both Foam Core and Wood Core Boards.
HIGHLIGHTS
High lift, low drag and pumpability
High performance glide
Prepreg carbon technology
WHERE IT THRIVES
Flat or choppy water
WHAT RIDERS SAY
"The HA1250 is so efficient I've lost count of how many waves I can connect" - Jesse Richman
Wing / Surf / SUP
The High Aspect HA1250 beats upwind like nothing else. The ultimate front wing for wing-foiling at speed, the HA1250 boasts high lift, speed, and glide in flat or choppy water. Exceptional efficiency and pumpability allows you connect wave after wave when prone or SUP foil surfing. It’s high wingspan to chord length ratio and relatively thin profile is similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size. The Sonar HA1250 is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay.
High lift, low drag and pumpability
The high aspect wing has a high wingspan to chord length ratio with a relatively thin profile to generate maximum efficiency and lift. Slightly longer radius turn than a lower aspect ratio wing of the same size.
High performance glide
When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay.
Prepreg carbon technology
Ultimate high-performance composite material
DETAILS
UPWIND SPEED AND EFFICIENCY FOR WINGFOILING
The biggest single thing that our high aspect front wing brings to the table for wing-foiling is windward performance. These wings beat upwind like nothing else.
HIGH LIFT, LOW DRAG AND PUMPABILITY
The high aspect Sonar Wing has a high wingspan to chord length ratio, with a relatively thin profile – similar to a sailplane glider wing. With this style of wing, you generate maximum efficiency and lift. The short chord length defines the profile thickness, and with a thin profile comes reduced drag. The span gives you stability, with a slightly longer radius turn than a lower aspect ratio wing of the same size.
HIGH PERFORMANCE GLIDE
When foil surfing, the efficiency and pumpability that allows you to connect wave after wave is insane. The Sonar High Aspect is an ideal wing for those days when the rides are long, and waves peel endlessly across the bay.
PREPREG CARBON TECHNOLOGY
Ultimate high-performance composite material
Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing.
The 680mm is the most common foil mast length for prone surf foiling and all round SUP. If there is one size mast for SUP, prone surf, or wake foiling, the 680mm mast will be your choice.
Other mast sizes available:
450mm (15.7 inches),
600mm (23.6 inches),
680mm (26.6 inches),
750mm (29.5 inches),
1050mm (41.3 inches)
119,00 €*
Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...