1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET
SIZES: 40 | 50 | 60 | 75 | 85 | 95 | 110 | 125 | 140WING-SURFING/FOIL SURF 3K CARBON/WOOD CNC EPS CORE CONSTRUCTION• Lightweight CNC cut EPS core• High density deck-to-bottom foil track system with carbon reinforcement• Full 3K carbon deck with wood sandwich and double wood in the stance area• 3K carbon reinforced wood sandwich bottom• Kevlar reinforced rails• Carbon strip bottom stringerEVA DECK• Diamond diecut EVA pad with micro dot embossing• Back foot arch support• Beveled tail kick areaFOOTSTRAP INSERT LAYOUT• Minimum stance width widened by 5 cm• 6 hole inserts for front strap positions• Layout allows for dual strap setup (back strap straight - front strap angled forgoofy or regular stance)• Windsurf style 3 strap setup• Front: parallel double strap setup FEATURES FOR S26• Due to their higher volume-to-length ratio and the option to ride withstraps, the 40, 50 and 60 liter boards have gained in popularity. Those sizeshave been fine-tuned to be used for both Wing-Surfing and surf foiling.The foil track boxes and the tail kick were moved 1.5 inches towards the tailto increase options for lighter riders mounting their foils for surf foiling.• All models have a decreased nose and tail width. This is more apparent onthe smaller sizes up to the 95 and only sightly visible for sizes above 95.The result is reduced swing weight, benefiting its use with the Wing-surfer,especially in windier conditions.• The foil track positioning has been moved closer to the tail on all sizes.This adjustment is more significant on the smaller sizes than on the biggersizes.• The tail kick was moved further back to align with the foil track boxes,lengthening the water line which results in earlier lift off.• The double concave nose shape was accentuated, softening re-entry whencoming off the foil.
INDIANA Y STRAP INCL. 3 SCREWS & 3 PLATES- Schrauben: metrisch
Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208. Features Top mounted for early breach recovery Carbon pre-preg construction Thin profile section for reduced drag Materials Pre-Preg Carbon
FUSION ALLOY TOP PLATE MKII HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast. Features: Precision CNC machined aircraft grade, anodized 6061-T6 aluminium Incredible torsional stiffness
SIZE CHART SIZE 6'4" 6'10" 7'2" 7'8" VOLUME 85 L 95 L 115 L 135 L WIDTH 19" / 48 CM 20" / 50.8 CM 21" / 53 CM 22.5" / 57 CM LENGTH 6'4" / 193 CM 6'10" / 208 CM 7'2" / 218 CM 7'8" / 233 CM WEIGHT (+/- 6%) 5,06 KG 5,39 KG 6,08 KG 6,74 KG FITTINGS 2X US FOIL TRACKS 2X US FOIL TRACKS 2X US FOIL TRACKS 2X US FOIL TRACKS REC. USER WEIGHT < 85 KG < 95 KG < 100 KG < 110 KG FOOTSTRAPS NO NO NO NO COLOR 266C 266C 266C 266C
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all. Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap) Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws
Our new V-STRAPS have been specifically designed for foilboards. The shape and material have been selected to bring maximum comfort and support while riding. Both straps have a thin layer of neo-fleece material on the inside that will bring extra comfort and softness. The main V-shaped piece for your front foot is compatible with boards that have one or two rows of inserts. Two options are available depending on the type of inserts (metal or plastic) on your board: M6 Screw Set (Ref. 77228-8001) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 4x Plastic shims 6x M6 22mm screws (SST 316) 6x Metal washers (SST 316), 12mm external diameter Recommended for : POCKET, POCKET CARBON, ROCKET ASC Self-tapping Screw Set (Ref. 77228-8002) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 6x Self-tapping screws 5x25mm (SUS 316) 6x Metal washers (SST 316), 14mm external diameter 4x Plastic washers (thickness = 2mm), 17mm external diameter Recommended for : ROCKET WING, ROCKET WING CARBON, ROCKET WING – S, ROCKET WING -S CARBON, POCKET CARBON CUSTOM
Naish S25 Jet Foil Complete 2450 The Naish S25 Jet Foil Complete 2450 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 2450 is ideal for riders +250 lbs Performance Features Jet 2450 Front Wing = Optimized early lift at low speeds Stabilizer 450 Back Wing = Early lift & intuitive turning 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response Construction Features Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant Tech Specs SizeFront Wing DesignAspect RatioWingspanProjected Surface Area 75 cm Jet 2450 4.1 39.4"/100 cm 380 in²/2450 cm² Naish S25 Jet Foil Complete 2450
JET FOIL RANGE: Jet 1050 + 1250 Naish Jet foils feature a medium aspect ratio delta-wing planform with moderate anhedral to deliver the optimum combination of early lift, speed, and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from windsurfing and wing-surfing to downwind kite foiling. The 1050 and 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for light wind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 back wing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra-lightweight and strong. Jet 1650, 2000, 2450 The Jet 1650, 2000, and 2450 share many similar features to their smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind, and Wing-Surf foiling. These wings are paired with the Stabilizer 450 back wing, which gives the complete setup more lift at lower speeds and is optimized for improved turning and pumping performance.
Sabfoil Gullwing 380 Pro Finish | Hydrofoil Stabilizer MAIN SPECS Surface: 180 cm2 AR: 8,10 Wingspan: 380 mm Chord: 60 mm Range Gullwing Stabilizer-Fuselage Connection Standard This fast and versatile stabilizer is ideal for all those who want to increase the control and stability of their hydrofoil. The gullwing shape guarantees good directionality while riding without sacrificing maneuverability when needed. The S380/PF is delivered with SAB Pro Finish, and thus hand sanded to achieve a matte surface with 0-thickness graphics, for an elegant Made in Italy product with maximum performance.
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all. Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws
The F-ONE aluminum mast can be connected to the board with several options. Choose from a 4-bolt top plate, a standard Tuttle head, a KF or a DKF head. All versions are fastened to the mast through a sleeve and a two-bolt system. The Mast Top parts are machined out of solid blocks of 6061 aluminum. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the fastening connections. The Top Plate has become standard on the market and is compatible with any board featuring a Twin-Tracks system. The spacing we use for the four screws is 160×90 mm, but our latest version also features an option for 165×90 mm. The Top Tuttle makes F-ONE foils compatible with all Tuttle boards. The Tuttle format is the original and standard one. A flange has been added around the base of the head to better spread the load through the structure of the board. The KF and DKF heads make current F-ONE foils compatible with kite or SUP foil boards produced previously with these boxes. Refs: 77207-0401 (mast top plate) / 77207-0404 (mast top tuttle) / 77207-0403 (mast top deep kf) / 77207-0402 (mast top kf)
HOVER INFLATABLE Inflatable Foiling PRODUCT DESCRIPTION The brand new Hover Inflatables set the standard for compactness for wing-surf foiling and SUP foiling. Offered in 5’7”, 135 liter and 6’7”, 170 liter sizes, these boards are easy to travel with and roll up to a backpack size for travel and storage. Although they are inflatables, these boards have made zero concessions when it comes to performance. Built with a double dropstitch construction and single center stringer, the Hover Inflatables are extremely stiff for superior foiling performance. The 6” sidewall also contributes to the overall board stiffness, volume and stability. The carbon foil mount spreads the load of a foil evenly, giving a composite like board ride while keeping overall weight to a minimum. For traveling wing-surfers or SUP foilers, the Hover Inflatable makes travel easy without sacrificing performance. 135 is ideal for riders up to up 231 lbs/105 kg170 is ideal for riders up to 264 lbs/120 kg PERFORMANCE FEATURES Compact Shape Superior Stiffness Wide Outline
WingAir SE PURE WING FOILING Our pure wing foil inflatable. The compact hull and JP’s superior construction provide a stiff feel when flying on the foil. It is super user friendly because it provides all advantages of inflatables: comfortable and smooth on your skin and knees, light and small for easy transport and storage. More on inflatables? See below...There is no better JP board when it comes to pleasurable, enjoyable and hassle-free winging in light winds. Pure wing foiling fun!Top recommendation: The NeilPryde Glide foil fits perfectly and is our first choice – the Glide Wind for beginners and/or heavy weights (for its ease, control and steady lift), the Glide Surf for light and/or advanced riders (for its agility and life).The two sizes from last year (5’4”x27.5” and 6’0”x28.5”) are now partnered with a smaller 5’0”x27.5”. All boards feature footstrap positions for wing-foiling and foiling. Inflatables have clear advantages over hardboards: They are super comfortable and user friendly as they are easy to transport and store. These JP inflatable wing foil boards are specially developed and equipped for early take-off, featuring hard rails, Triple Layer Composite Drop Stitch and more. Additionally, they come in JP’s superior welded technology. Welded Technology: This heat-welded connection was introduced last year and proved to be successful. It creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer. Hard Rails: In the tail, the specially developed, super clean hard rails are covered by a fibre reinforced layer of PVC cloth and create a smooth and efficient water release. Thus, the board picks up speed to take-off easily. Touchdowns are smooth and comfortable. Triple Layer: They come with Pre-Laminated Triple Layer Composite Drop Stitch, Fibre Reinforced Stringers in deck and bottom and Welded Rails and will surprise you with their stiffness. Track Foil Plate: The board features a Track Foil Plate of the same size as on our hard boards providing a big range of foil placement. The G10 material adds additional longitudinal stiffness to the hull. On the other hand, this plate is not too long – thus you don’t need an oversized bag but it can still be folded easily into a normal size SUP backpack. Footstraps: The boards come with three easy-to-mount footstraps for wing foiling. Comfort: The hull’s soft skin is covered with a large, slip-proof EVA sheet for unmatched comfort and a safe stance. You also don’t have to worry about mistakes anymore because you won’t get hurt when falling on it. Transport and Storage: Rolled up, the boards fit into a backpack – no more need for a car with roof rack for transport or a big garage for storage. In times when airlines are hesitant to accept windsurf equipment, the boards’ backpack dimensions are a major advantage! ADDITIONALLY INCLUDED ACCESSORIES * 3 straps* Pump* Repair set* User manual* Backpack PLEASE NOTE: Reduced foil track depth [13mm]. Make sure to use the right screw length for your plate mount system!MAX screw length = 13mm + Plate Thickness All JP foil boards come without screws to attach the foil. Reason: The screw length has to match the plate thickness which varies from foil and brand, so, screws are provided by the foil brand. Note: This inflatable JP board features a special G10-track-plate requiring shorter screws, than all our JP composite boards.For example:The screws supplied with NP foils fit all JP composite boards. But these screws are too long for this inflatable!Therefore, NeilPryde now also offers a set of four M8x20 screws (titan, torx key head) in their spare parts range.
Infos & Characteristics Foil box features several compartments and protection flaps to protect a disassembled foil. Mast, front wing, stabilizer, screws & tools all have a specific room. There’s even a compartment for a helmet. SIZES 1100X310X200MM - 1.45KG
FUSION V-SERIES TAIL STABILIZERS HIGH ASPECT SIZES: 180 / 230 / 285 One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability. Features: Optimal efficiency and maneuverability Flat center, to downward tips, for perfect balance between locked-in feel and agility Single molded components for minimal drag Full prepreg carbon construction PMI core for superior strength to weight ratio 180 cm², WS-340, AR-6.42 230 cm², WS-400, AR-6.96 285 cm², WS-450, AR-7.11 Set Includes: Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws, {(ear fuselage not included)
JET 1250 COMPLETE Foil Surfing/Wake Foiling/Wing-Surfing PRODUCT DESCRIPTION Naish Jet foils feature a medium aspect ratio delta wing planform with moderate anhedral to deliver the optimum combination of early lift, speed and turning ability. These wings are the ideal choice for foil surfing as well as a wide range of disciplines from wind surfing and wing-surfing to downwind kite foiling. The 1250 are the go-to sizes for surf foiling in faster, steeper surf. These wings are also an excellent option for lightwind kite foiling and windsurf foiling on crossover style boards. These wings are paired with the Stabilizer 320 backwing, which gives the complete setup more intuitive turning and response for pumping. To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 1250 is ideal for riders 160-210 lbs PERFORMANCE FEATURES Jet 1250 Front Wing = Optimized lift, speed & turning Stabilizer 320 Back Wing = Intuitive turning & stability 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response CONSTRUCTION FEATURES Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts 5 x 20 mm Torx Head Stainless Steel Screws (Connect Wings to Fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (Connect Mast to Fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (Direct Connect Plate to Board) = Superior torque + corrosion resistant
SPIRIT FREERIDE 700 / 60 Das Spirit Freeride ist ein einfach zugängliches Allround Foil und das ideale Mittel, um deine Foiling-Skills rasch zu verbessern. HAUPTMERKMALE DUOTONE SPIRIT FREERIDE EINFACH ZUGÄNGLICHES ALLROUND FOIL DAS SPIRIT FREERIDE IST EIN EINFACH ZUGÄNGLICHES ALLROUND FOIL UND DAS IDEALE MITTEL, UM DEINE FOILING-SKILLS RASCH ZU VERBESSERN. RICHTUNGSSTABILITÄT UND -STEUERUNG GUT VORHERSEHBARE RICHTUNGSSTABILITÄT UND -STEUERUNG IN JEDER SITUATION. NEUE ALUMINIUM-FUSELAGE MIT POCKET FÜR MASTVERBINDUNG EINE EINZIGARTIGE NEUE ALUMINIUMFUSELAGE MIT POCKET FÜR DIE MASTVERBINDUNG GARANTIERT EINE MAXIMALE STEIFIGKEIT SOWIE DIE BESTE UND DIREKTESTE ÜBERTRAGUNG VON STEUER-IMPULSEN. NEUES MASTPROFIL MIT LÄNGERER PROFILLÄNGE DAS NEUE MASTPROFIL MIT LÄNGEREM PROFIL VERHINDERT EINE VENTILATION BEI HOHEM SPEED. VORDERER UND HINTERER WING AUS CARBON COMPOUND EINZIGARTIGE UND UNGLAUBLICH ROBUSTE WINGS VORNE UND HINTEN AUS CARBON COMPOUND. FORMULA 1 FUSION TECHNOLOGIE DIE FORMULA 1 FUSION TECHNOLOGIE WIRD FÜR DIE VERBINDUNG ZWISCHEN MAST UND BRETT EINGESETZT – MADE IN GERMANY! DETAILS DUOTONE SPIRIT FREERIDE Das Ziel hinter dem Spirit Freeride Foil war, mit einem Mehrzweck-Hydrofoil-Setup den perfekten Allrounder zu schaffen. In den meisten Fällen wirst du nicht mehr als einen kleinen Power-Schub von deinem Kite brauchen, um bereits bei geringer Geschwindigkeit zu foilen. Die Größe des hinteren Wings des Spirit sorgt für eine gute Pitchregelung bei geringer Geschwindigkeit, ohne dir im Top-End im Weg zu stehen. Winglets bieten eine gute Richtungsstabilität und -steuerung. Für den Beginn deiner Foil-Freeride-Laufbahn gibt es keine bessere Wahl als das Spirit Freeride Setup zu einem unschlagbaren Preis.
HA 1125... TAKING PERFORMANCE, SPEED AND GLIDE TO THE NEXT LEVEL! Performance, speed and glide have been taken to the next level with the High Aspect 1125. It was developed with key design input from Pete Burling, helmsman of Team New Zealand’s Americas Cup yacht (Current AC holders) and tested by legendary sailor, Jimmy Spithill. Pete, Jimmy and Armie became friends as foiling united their search and passion for ultimate performance and glide on downwind runs. The mad scientist and these high-performance sailing gurus have collaborated to create something the likes of which has not seen before outside the Americas Cup! At 9.8:1 it’s a true High Aspect ratio foil wing that sets the standard for glide performance, while retaining enough handling that it can be turned easily, making for an exhilarating ride. Downwind aficionados requiring max glide performance will want to get their hands on this wing simply because it is next level! In small surf on an 85cm mast or longer, the HA1125 can be ridden to good effect, the turning radius is surprisingly good for is high aspect ratio. The sleek, inflected tips help prevent ventilation even if a tip breaches. It’s next level pump and glide make it easy to double dip! For experienced wingers there is no comparison. It makes tacking fun and easy as the glide gives you so much time to complete maneuvers like 360’s. Combine this with amazing upwind angles and outrageous downwind glide, as well as freakish light wind performance and the riding it just never stops! Construction Construction is based around a high-density foam core, which is wrapped with 100% IM and High Modulus Carbon. The main wings are shaped and refined for maximum stability and predictability at all speeds The foil sections have been carefully designed by one of the world’s foremost sport wing designers. DimensionsArea: 1125 cm2Wingspan: 1050 mmWeight: 955 gramsAspect Ratio: 9.8
FUSION FQR HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Patent pending Cabrinha Foil Quick Release is an innovative new tool-less mast plate that allows you to detach your foil mast from the board in seconds. The tapered engagement provides a press fit that will ensure a solid connection without any movement. Gone are the days of trying to tetris pack your foil boards to and from the beach, simply pull the release lever and the mast detaches. The FQR release attaches to all industry standard 9cm foil board track. Features: Cam lever - Tool less operation Aircraft grade extruded, anodized 6061-T6 aluminium components Lightning fast attachment Universal 9cm mounting Safety key engagement tapered engagement Anti-line snag geometry - increased safety when kiting Precision calibration design
Our 2 most popular Hover Wing Foil sizes in a price point construction.GLASS/WOOD CNC EPS CORE CONSTRUCTION• CNC cut EPS core• High density deck-to-bottom foil track system with carbon reinforcement• Full glass wood sandwich deck and bottom constructionEVA DECK• Micro dot embossed EVA deck• Dual layer foot strap area supportFOOTSTRAP INSERT LAYOUT• Layout allows for dual strap setup (back strap straight - front strap angled forgoody or regular stance)• Windsurf style 3 strap setup• Front: parallel double strap setupS26 HOVER WING FOIL GSSIZES: 110 | 125WING-SURFING/FOIL SUPLENGTH WIDTH THICKNESS
Rise up Let the Seek wing-foil board take you places you’ve never been. Upwind, downwind, ocean roller or lake. Wherever you fly, whatever adventure you take. Engineered for performance. Early take-offs. Effortless touchdown recovery. The Seek provides you with an intuitive and direct connection to your hydrofoil, becoming an extension of you – the rider. It has an ultra-lightweight yet durable hybrid carbon construction that is stiff, responsive and maneuverable and it’s precisely-balanced distribution of volume means that no matter whether you’re in displacement mode, skimming or foiling, your stance remains in the same position - no shuffling required. Because every movement counts. Try it. Land it. Or pump it. Floater, sinker or somewhere in between – there’s a board size and volume for every start need. And no matter what, you won’t look like a kook carrying your setup to the water. The recessed carry handle will keep your Seek, Sonar and dignity safe. Cutaways and tapered tail The sharp release edge on the tail allows for an earlier take-off, while the cutaways and the way the tail tapers reduces the volume in the tail, helping to bring the board’s centre of buoyancy forward, right underneath your stance. Touchdown Recovery The nose spine and double-concave in the underside of the nose, combined with the steep bevelled rails, helps with touchdown recovery. The V-shape in the bottom contour of the board breaks the water surface on touch down, so the board dives in gently and releases quickly, without sticking. The V also helps to funnel air under the board, which helps it to release faster. Hybrid Carbon Technology Lighter weight construction for stiffness, manoeuvrability and glide. The stiffer the board, the better it will pump and the more responsive it feels. A light yet durable board with greater impact resistance and rigidity. DETAILS NEW FREE-V AND FREE FOIL STRAP INSERTS Additional off-centre strap inserts allow you to customise your stance with 5 different positioning options for each strap - or go strapless. (Straps sold separately) GORE™ WATERPROOF 2-WAY VENT The EPS core of a high volume board is affected by extreme temperature changes. To prevent air pressure build-up we’ve installed a two-way GORE™ Protective Vent on the top deck. This allows air to pass in and out of the board, while preventing water from entering. The vent is factory-fitted and does not require any adjustment. DOUBLE CONCAVE DECK There is a significant amount of concave in the deck that works to position the rider lower and makes the board more stable to ride. The concave puts all the volume outside on the rails, so the centre of the board is the low point. It creates the best potential for balancing and is the most comfortable and responsive shape to stand on. HYBRID CARBON TECHNOLOGY Lighter weight construction for stiffness, manoeuvrability and glide. The stiffer the board, the better it will pump and the more responsive it feels. A light yet durable epoxy composite laminate, with a balanced carbon and e-glass fibre layup is wrapped around an EPS core. High-density closed cell PVC reinforcement around the foil track mount, leash plug and foot strap inserts spreads the load. An ultra-lightweight double bamboo reinforcement layer under the standing area adds greater impact resistance and rigidity. INTEGRATED PVC STRUCTURAL STRINGER SYSTEM The DropBox foil mounting tracks are embedded into a high-density closed-cell PVC block. Two high-density PVC stringers are glued to each side of this block, distributing the load lengthwise, and the full system connects the top and bottom laminate skins for maximum support. DROPBOX ADJUSTABLE FOIL MOUNTING TRACK Speed-dial your foil setup. Simply drop your foil pre-assembled with screws and t-nuts into the track, slide it backwards, then tighten the screws to fasten. Our unique structurally-integrated DropBox has a longer track for a wider adjustment range, allowing you to precision-tune the foil set up for your rider weight. A measurement guide next to the track aids correct positioning. Industry-standard 90mm track spacing means the DropBox is compatible with most foil systems. DEEP-V DOUBLE NOSE CONCAVE The nose spine and double-concave in the underside of the nose, combined with the steep bevelled rails, helps with touchdown recovery. The V-shape in the bottom contour of the board breaks the water surface on touch down, so the board dives in gently and releases quickly, without sticking. The V also helps to funnel air under the board, which helps it to release faster. STEEP BEVELLED RAILS Help with touchdown recovery and water release. CORDUROY DECK GRIP WITH TACTILE & VISUAL STANCE REFERENCE For a more intuitive and direct connection to your foil, grippy longitudinal corduroy with centre-line ridge allows fast, easy tactile foot placement. Tail kickpad with cutouts on the Swell for your feet while prone paddling. Transverse markers on the deckpad provide a visual reference, giving you confidence to adjust. INTEGRATED UNDERSIDE CARRY HANDLE Recessed carry handle on the underside of the foil board allows balanced load handling with or without the foil attached and leaves your other hand free to carry your wing or paddle down to the water. COMPACT OUTLINE WITH GENEROUS NOSE VOLUME The shorter the board, the more effective it is for pumping, the less swing weight, and the more aerodynamic and manoeuvrable it is when riding up on the foil. The reverse shear of the deck and downward curve in the nose allows for greater control over the board, even when fully submerged on water starts. The extra nose volume was added on top so the boards could be cut short without losing stability and allows you to ride a board 6” shorter. The volume in the nose also stops you nose-diving when you’re paddling into a wave and helps keep the water off the concave deck. CUTAWAYS AND TAPERED TAIL The sharp release edge on the tail allows for an earlier take-off, while the cutaways and the way the tail tapers reduces the volume in the tail, helping to bring the board’s centre of buoyancy forward, right underneath your stance. Having the centre of buoyancy directly underneath your stance is essential for finding that sweet spot on the board where you can remain without shifting your weight back and forward. The wedged tail shape reduces the overall length and improves the pumpability of the foil. Every movement counts to staying up on the foil.