Der Cabrinha Foil Mast ist voll kompatibel mit allen Cabrinha Foils von 2016 bis 2020 (ausser dem AV8) The CabrinhaFoil Mast is fully compatible with all Cabrinha Foils Years 2016,2017,2018,2019 and 2020 (only not the AV8 foil)   Größen SIZES40 cm | 60 cm | 85 cm

SIZES: 40 | 50 | 60 | 75 | 85 | 95 | 110 | 125 | 140WING-SURFING/FOIL SURF 3K CARBON/WOOD CNC EPS CORE CONSTRUCTION• Lightweight CNC cut EPS core• High density deck-to-bottom foil track system with carbon reinforcement• Full 3K carbon deck with wood sandwich and double wood in the stance area• 3K carbon reinforced wood sandwich bottom• Kevlar reinforced rails• Carbon strip bottom stringerEVA DECK• Diamond diecut EVA pad with micro dot embossing• Back foot arch support• Beveled tail kick areaFOOTSTRAP INSERT LAYOUT• Minimum stance width widened by 5 cm• 6 hole inserts for front strap positions• Layout allows for dual strap setup (back strap straight - front strap angled forgoofy or regular stance)• Windsurf style 3 strap setup• Front: parallel double strap setup FEATURES FOR S26• Due to their higher volume-to-length ratio and the option to ride withstraps, the 40, 50 and 60 liter boards have gained in popularity. Those sizeshave been fine-tuned to be used for both Wing-Surfing and surf foiling.The foil track boxes and the tail kick were moved 1.5 inches towards the tailto increase options for lighter riders mounting their foils for surf foiling.• All models have a decreased nose and tail width. This is more apparent onthe smaller sizes up to the 95 and only sightly visible for sizes above 95.The result is reduced swing weight, benefiting its use with the Wing-surfer,especially in windier conditions.• The foil track positioning has been moved closer to the tail on all sizes.This adjustment is more significant on the smaller sizes than on the biggersizes.• The tail kick was moved further back to align with the foil track boxes,lengthening the water line which results in earlier lift off.• The double concave nose shape was accentuated, softening re-entry whencoming off the foil.

Naish 2022 Foil Mast Aluminium 55 cm Naish 2022 Foil Mast Aluminium 65 cm Naish 2022 Foil Mast Aluminium 75 cm Naish 2022 Foil Mast Aluminium 85 cm Naish 2022 Foil Mast Aluminium 95 cm

KOMPLETTSET FOIL UND BOARD!!! Das Speedster Combo ist ein leicht zu kontrollierendes Foil und der ideale Begleiter, um schnell Fortschritte zu erzielen. Dank der zwei verschiedenen Mastlängen sind sowohl hohe Geschwindigkeiten als auch exzellente Stabilität erlebbar. HARDFACTS RIESIGER GESCHWINDIGKEITSBEREICH, GEEIGNET FÜR VERSCHIEDENSTE FAHRLEVEL. EINZIGARTIGE WINGLETS FÜR EXAKTE SPURTREUE UND VERBESSERTEN DREHRADIUS HOHER LIFT UND GERINGE STALL-ANFÄLLIGKEIT VEREINFACHEN WENDEN UND HALSEN ÄUSSERST LANGLEBIGE FLÜGEL UND FUSELAGE AUS CARBO WINGLETS VERBESSERN NICHT NUR STABILITÄT BEIM GERADEAUSFAHREN, SONDERN AUCH SPURTREUE IN KURVEN ZUSÄTZLICHER KEIL FÜR DEN HINTERFLÜGEL VERBESSERT KONTROLLE BEIM AUFSTEIGEN DES FOILS   SPEEDSTER COMBO INCL. FREE FOIL BOARD

The new ION safety footstrap offers a adjustable emergency opening during crashes.

- 3 Stck. Foil Footstraps  Pace = M6 x 21 mm Pace SLS = Selbstschneidene Schrauben - self cutting screws

Created in collaboration with Cloud IX surf foils the Impulse wing set confidently crosses kite, surf and wake hydrofoiling. Designed to provide rapid lift and long glide, along with a wide speed and wind range. The Impulse will take your freeride kite hydrofoiling to the next level. Allowing more time for tack and gybe transitions, constant wing engagement on jump landings, and the ability to drop a size kite or get out in even lighter wind conditions than ever imagined. These same design attributes make the Impulse ideal for mounting on a hydrofoil compatible SUP or prone surfboard. Efficient and smooth controlled lift, along with the ability to generate glide by pumping the wing, keeps swell energy connectivity easy and manageable. This magic can be translated behind the boat where the Impulse excels at sustained hydrofoiling on both the primary and secondary wakes with or without the rope! Standard Impulse set sizeMast Length: 94.8cm alloy 2480gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 4420 (with variance) Short mast Impulse set sizeMast Length: 60cm alloy 1770gFuselage Length: 76cm carbon with 2 position rear wing options 540gImpulse Wing Set: 1400g (with variance)Total Unit Weight: 3750g (with variance) Technical DataRider level Intermediate – AdvancedConfort zone speed 12-18 miles/hLow end lift speed 5 miles/hTop end speed 24 miles/h Kite & Surf Crossover use for kite, surfing, SUP and wake Carbon Wings Carbon construction low aspect wing Alloy Mast Efficient profile extruded alloy mast (available in 2 lengths) Carbon Fuselage Carbon fuselage with dual position rear wing mounting Lightweight Lightest crossover hydrofoil kit available

FEATURES - For multiple foil types (110x45x15cm)- Removable padded divider with integrated pockets 2x (40x105cm)- Protected shaft pocket- Transparent inner pocket (3x)- Shoulder strap- Carry handle- Heavy duty zipper- Compression straps FABRICS - PVC coated 420D Polyester- Heavy duty tarpaulin (inside)

FUSION H TAIL STABILISER HIGH ASPECT FOIL HS180 DESIGN Geschwungene Outline, gerade Hinterkante, schlankes Draft-Forward-Profil, moderate Anhedrale (negative V-Form) PROFIL Vielseitiges, effizientes, schnelles High-Performance-Wing-Set WING FEATURES Optimale Effizienz und Manövrierbarkeit Flacher Mittelbereich, nach unten gezogene Tips – perfekte Balance aus Halt und Agilität Nahtlos geformte Einzelteile (single molded) für minimalen Widerstand Vollcarbon-Prepreg-Konstruktion PMI-Core für optimales Härte-Gewichtsverhältnis Im Set enthalten: Stabilizer, Wing-Covers, 2 Stk. m6 ss316 Torx titanbeschichtete Schrauben Als nahtlos geformte Einzelkomponente für die Fuselage bietet der HS180-High-Aspect-Stabiliser einzigartige Effizienz und Stabilität. Präzise auf sämtliche Wings der H- und X-Series abgestimmt, garantiert er perfekte Kontrolle bei verschiedensten Drehwinkeln.

1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST  75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET   UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST  85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET

AV8 FOIL & BOARD Set - High performance super light carbon foil and board - original list price was 3548 euro Set containing of:   AV8 FOIL BOARD HIGH PERFORMANCE KITE RACE Sizes: 148.8cm x 45.2cm x 7.7cm   The AV8 foil board is specially designed for riders looking for performance and efficiency with high end materials. The AV8 is made from 100% prepreg carbon with EPS foam core. With it's race oriented design, beveled rails for max lean angle and it's extended planing surface, the AV8 will keep you ahead of the pack. A warrior on the race course and an explorer on the open water.     DESIGN PROFILELow weight, max lean angle, early take-off.     FEATURES EPS Core, light weight, buoyant 100% carbon sandwich Beveled Rails provide you with maximum lean angle Pro box foil connection Full EVA pad 3 Strap insert configuration AV8 FOIL KIT HIGH PERFORMANCE RACE Sizes: 105 CM MAST   The AV8 hydrofoil is a stunning work of art designed for riders looking for ultimate performance and efficiency. Made from 100% pre-preg carbon, the AV8 foil assembly is as beautiful as it is technical. It’s wing is incredibly fast yet infinitely adaptable to wind and water conditions. For a wing with no apparent limit to it’s top end speed, it’s incredibly stable and forgiving at low speeds. A warrior on the race course and an explorer on the open water. Board match: AV8 board, (Autopilot, X-Breed Foil and DA, with adaptor).   DESIGN PROFILEHigh aspect ratio, lean profile, continuous curve anhedral.   COMPONENT FEATURES 100% pre-preg carbon construction Pro box mounting Short fuselage configuration for superior maneuverability Integrated wing and fuselage for maximum stiffness  WING FEATURES Lean profile for low drag and on demand acceleration 100% Pre-preg carbon construction  High Aspect Ratio layout for ultimate performance and speed    TECH SPECS Chord: 117mm Projected area: 56,916 mm² Wingspan: 605mm AR: 6.4 Volume: 443,700 mm³ Set includes:Titanium hardware - m6x40mm(4pcs), 4mm allen key (1 pcs). SET DOES NOT INCLUDE STRAPS

HIGHLIGHTS Lightwind Wing Foiling Reflexed technology for stability and speed Self-trimming WHAT RIDERS SAY "This is the easiest to ride hydrofoil I’ve ever been on in my life." - George Hradil Wing / SUP / Surf The new 2200R reflexed wing is brilliant for lightwind wing-foiling. Unbelievable stability and slow stall speed through the turn makes learning gybes and tacks easier, giving newer riders confidence to try more manoeuvres and progress quickly. Smooth carvy turns in prone for heavier riders and in SUP foiling. Touchdowns are a breeze. Featuring our new, specialised reflexed-camber foil section design to give the wing pitch stability. This eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. The 2200R has a relatively large surface area, which makes it highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because it is positioned on the fuselage with a lower angle of attack, the 2200R feels smaller than it is in terms of speed range and responsiveness. Lightwind Wing Foiling A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling Reflexed technology for stability and speed Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing. Self-trimming The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. DETAILS INCREDIBLY STABLE Gives newer riders confidence to try more manoeuvres and progress quickly PRE-PREG CARBON TECHNOLOGY Ultimate high-performance composite material LIGHTWIND WING FOILING A performance crossover wing with smooth carvy turns in prone for heavier riders and in SUP foiling. Brilliant for lightwind wing-foiling REFLEXED TECHNOLOGY FOR STABILITY AND SPEED Our new, specialised reflexed-camber foil section design gives the wing pitch stability all on its own. It’s like we’ve built a mini-stabilizer into the trailing edge of the wing which counters the downward pitching moment and gives you impressive control throughout the entire speed range, with extreme top-end speeds unheard of for a wing that size. SELF-TRIMMING The reflexed wing prevents your board’s tendency to nose up strongly when you first get going. Thus it eliminates the need for you to change your position to trim the board as you speed up, or as you drop-in on a wave. MASSIVE RANGE, LOW STALL-SPEED, INCREDIBLE CONTROL The Sonar reflexed wings have a relatively large surface area, which makes them highly controllable, with incredible roll and pitch stability. Usually, a large wing means more drag, hence less speed. But because you can position the reflexed wings on the fuselage with a lower angle of attack, they feel smaller than they are in terms of their speed range and responsiveness.

2022/23 Naish Jet Foil Series for maximum performance There are three versions: Jet Foil HA (High Aspect) Semi Complete (=no mast) Jet Foil MA (Medium Aspect) Semi complete  (=no mast) Jet Foil Standard (Low Aspect) Semi Complete  (=no mast) Here are the main differences between these models. High Aspect (HA) Foil: High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio). These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance. High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio. Medium Aspect (MA) Foil: Medium aspect foils strike a balance between the characteristics of high and low aspect foils. They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability. Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control. Low Aspect (LA) Foil: Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio. These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed. Low aspect foils are often chosen for learning to foil and for cruising at lower speeds. When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use. The high number (for example 1600) gives you the surface of the front wing in cm2. Scope of delivery: Jet front wing + EVA cover Stabilizer Jet HA + EVA cover Fuselage Carrying case Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)

Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"  

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws

Unmatched comfort, speed, light wind abilities, and; a twintip feeling! No need to change positions, no need to move your feet, going both ways was never so easy on a foil. Our full carbon Twin Fin Foil gives you all the performance you need, and all the lift you want. Creating an ultimate platform for any board; twintip, softtop or even an inflatable!

1x Front Wing - 1150 - PNG - Carbon 1x Rear Wing 475mm Progressive Carbon  1x S-Series - Fuselage - Standard Length - 765mm 1x 19mm - K/S-Series Freeride Foil Mast 75cm 1x Fuselage to 19mm Mast Adapter / Doodad 1x 19mm K/S-Series Foil Base Plate 1x One STAINLESS Screwset and Toolset for All Black Series, S-Series

Our new highest quality pre-preg carbon mast delivers a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction, the refined one-piece design presents a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions. Features GeoLock.

HI:RISE CARVE ALL-AROUND FREERIDE KITESURF The foil has a frontwing size of 1160 cm2 Sizes: 65, 85 CM MAST   The HI:RISE CARVE is specifically designed for any rider looking for a diverse wing set, which will take you from your first steps, to next level freeride and waves. The Carve wing is a modern high lifting wing set that is highly manoeuverable bringing you an entirely new level of performance and fun. With its signature winglets, the HI:RISE CARVE is a stable and easy foil to fly. The lower aspect ratio outline combined with the foil cross section requires very little input from your kite to get flying. Once up, the sky is the limit. The added lift comes into play whether you are carving turns in the pocket or pumping through lulls.  The winglets provide an added level of stability to the wing and reduces induced drag, increasing aerodynamic efficiency, especially when riding through turbulent waters. The rear wing can be adjusted forward or aft to increase the ability to "carve" or facilitate a more 'locked-in' ride. These light weight wings are constructed with a Pauwlonia wood core and durable Basalt fibers. The wingset mounts to our all new 75cm (29.5 inch) wide nosed fuselage. The wider nose of the fuselage facilitates a significantly more stable connection to the wing.  The wing set and fuselage are compatible with the Cabrinha foil eco system. Choose the mast length that suits your style and performance needs. Board match: AutoPilot, X-Breed Foil, Double Agent. Please note the updated screw sizings for the Carve front wing: Front hole: 38mm / Middle hole: 38mm / Rear hole: 27mmNot sure? Check out the Foil Screw Guide   DESIGN PROFILELow aspect ratio, low planing profile section, moderately swept outline, compound anhedral.   COMPONENT FEATURES NEW 750mm extended Widenose Fuselage with improved stability and hydrodynamics NEW adjustable rear wing positioning for increased ability to "carve" or facilitate a more 'locked-in' ride Aircraft-grade extruded, anodized 6061-T6 aluminium components Hollow core Mast extrusion for improved floatation and minimal weight Lightweight top socket with indicator for use on industry standard track mounting system or 4 point connection

FUSION ALLOY MAST FOIL 40cm 70cm 90cm DESIGN PROFILE Strapazierfähiges, langlebiges Setup aus Metalllegierung mit einzigartiger Festigkeit  RIDER PROFIL Für Rider, die ein vielseitiges und ultrasteifes Foil-System suchen MAST FEATURES 3-Schrauben-Connection für höchste Stabilität  Anodisiertes 6061-T6-Aluminum in Luftfahrt-Qualität  Präzise verlaufende Fuselage-Mast-Verbindung für optimale Stabilität  Helicoil-Inserts für minimierte Korrosion und lange Haltbarkeit  Wasserdichte, hohle Bauweise für optimales Stabilitäts-Gewichtsverhältnis   Der Fusion Alloy-Mast besteht aus stranggepresstem Aluminium in Flugzeugqualität, was zu einer unglaublich steifen und hydrodynamischen Struktur führt. Helicoil-Einsätze verhindern Salzwasserkorrosion an den Verschraubungspunkten. Der Mast lässt sich nahtlos in alle 9-cm-Industriestandard-Foilboxen integrieren.

HIGHLIGHTS Sonar CF72 or CF85 Mast Easy recovery from surface breaching Carbon Fuselage 600mm WHERE IT THRIVES Wing, SUP or Surf foiling WHAT RIDERS SAY "Nothing beats the feel of carbon." - UIi Sommerlatt Beyond Limits Insane response. Incredible performance. Our new highest quality pre-preg carbon modular foil edition provides a stiffer, more direct feel and more immediate feedback. Engineered with increased strength for higher loads, the Carbon Edition excels across all foiling disciplines. The refined one-piece mast design is tapered for optimal load transfer and lower surface friction, and features our unique GeoLock system. Comes complete with our new high-strength 600m pre-preg carbon fuselage and S01 Stabilizer for a durable, corrosion-free foil with great pumpability and a sporty feel with earlier take-offs. The CF72 mast is ideal for shallower waters, and prone surf foiling. The longer CF85 mast increases overall ride performance in choppy conditions. Sonar CF72 or CF85 Mast New highest quality pre-preg carbon mast for a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction. Refined one-piece design - strong, durable and corrosion-free. Easy recovery from surface breaching In perfect harmony with any Front Wing, our dihedral-shaped carbon pre-preg rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy surface breach-recovery. Carbon Fuselage 600mm New high-strength 600m pre-preg carbon fuselage weighs ~50% less than the A600, with equal strength and stiffness. Strong, durable and corrosion resistant. Improves pumpability. Earlier take-offs. DETAILS SONAR CF72 OR CF85 MAST New highest quality pre-preg carbon mast for a stiffer, more direct feel and more immediate feedback. Tapered for optimal load transfer and lower surface friction. Refined one-piece design for a strong, durable and corrosion-free choice across all disciplines. The CF72 mast is ideal for shallower waters, and prone surf foiling. choice across all disciplines. The longer CF85 mast increases overall ride performance in choppy conditions. GEOLOCK LOAD BEARING CONNECTION Engineered to last, our unique GeoLock tapered geometry locking system provides a more effective load-bearing connection between the Mast and Fuselage, locking them together, so they feel like one piece. Screws engage the GeoLock while the load transfer now takes place over the full cross-section of the mast profile, allowing for a more efficient load distribution and longer-lasting connection. Patent-pending. EASY RECOVERY FROM SURFACE BREACHING In perfect harmony with any Front Wing, our dihedral-shaped carbon pre-preg rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy surface breach-recovery. The Stabilizer's positioning on top of the Fuselage allows for a clean, undisturbed approaching flow. Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in the water and is still fully submerged, giving you that extra time to react and adjust your ride height. INDUSTRY-STANDARD 165X90MM BOLT PATTERN The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil Board and foil to board attachment screws sold separately CARBON FUSELAGE 600MM New high-strength 600m pre-preg carbon fuselage weighs ~50% less than the A600, with equal strength and stiffness. Strong, durable and corrosion resistant. The shorter length C600 Fuselage improves pumpability and has a sporty feel with earlier take-offs. Features GeoLock.   Fits all Carbon and Aluminium Sonar Masts. MODULAR FOIL SYSTEM Customise your ride with our fully interchangeable foil parts to explore multiple disciplines and riding styles all with one setup. SUPPLIED WITH SONAR TRAVEL BAG Stow your Sonar Quiver safely in between sessions with our Heavy Duty 600D Padded Travel Bag. Roomy enough inside to fit the complete Sonar Foil set, including all three wings and three masts inside their individual covers. The bag also has enough depth to leave the Board Adaptor connected to the mast, making your foil packdown faster. Designed with straps, clips and interior pockets to secure contents. Your worry-free travel companion. Included with every complete Foil Edition. FOIL TO BOARD MOUNTING HARDWARE SUPPLIED WITH NORTH FOIL BOARDS   FRONT WINGS SOLD SEPARATELY​   INDUSTRY-STANDARD 165X90MM BOLT PATTERN The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil Board and foil to board attachment screws sold separately  

FUSION CARBON MAST FOIL / LIGHTWEIGHT 70cm 80cm DESIGN PROFILE Perfektes Härte-Gewichtsverhältnis, niedriges Angleitprofil RIDER PROFIL Für Rider, die nach einem 100% Carbon, ultra-steifem und ultra-leichtem Mast suchen MAST FEATURES Integrierte Base-Plate für herausragende Stabilität und reduziertes Gewicht  I-beam Vollcarbon-Prepreg-Konstruktion  PMI-Core für einzigartiges Härte-Gewichtsverhältnis Präzise verlaufende Fuselage-Mast-Verbindung für optimale Stabilität  Angeschrägte Sehne reduziert den Widerstand 3-Schrauben-Connection mit Gewindeeinsätzen aus Messing Der Fusion Carbon-Mast stellt Performance über alles.  Die Prepreg Vollcarbon-Konstruktion sorgt für wahnsinnige Steifigkeit in einem leichten Paket. Der Mast lässt sich nahtlos in alle 9-cm-Industriestandard-Foilboxen integrieren.

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 900mm mast is the choice of big wave enthusiasts and tow-ins, when combined with the 680mm front wing. It's also the choice of downwinder pros when competing in open ocean swell. The AXIS 900mm mast is the main size mast for wind foilers and kite foilers, when they reach they are are not beginners any longer. Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)