Front Pad ca. 46x36cmTail Pad ca. 42,5x34cm

Used to connect your 19mm Mast to your Fuselage. AKA "Doodad"  

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

The following are included in our Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*30 Countersunk 316 grade Torx drive Stainless Steel screws Torx Key for M8 Torx Key for M6 2 x M6*14 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*22 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M6*25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x mast track sliders 4 x M8 x 25 Countersunk 316 grade Torx drive Stainless Steel screws 4 x M8 x 20 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8 x 16 Countersunk 316 grade Torx drive Stainless Steel screws

The AXIS 8' Coiled Waist Leash is a super comfortable leash which keeps excess length from dangling behind your board and foil. It will also stay out of the way of your legs and ankles allowing you to move more freely. Heavy Duty 8mm Urethane coated Less Drag in Water Soft Padded neoprene on interior of the belt Velcro for ease of tightening/releasing 8' long

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 900mm mast is the choice of big wave enthusiasts and tow-ins, when combined with the 680mm front wing. It's also the choice of downwinder pros when competing in open ocean swell. The AXIS 900mm mast is the main size mast for wind foilers and kite foilers, when they reach they are are not beginners any longer. Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 450mm foil mast is ideal for your first flights, while you are learning how to start to foil. Most riders spend only a few hours or less on the shortest foil mast we make (450mm) before they graduate to the longer foil masts. Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 680mm is the most common foil mast length for prone surf foiling and all round SUP. If there is one size mast for SUP, prone surf, or wake foiling, the 680mm mast will be your choice. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 600mm mast is the most common mast that you will start putting hours on. You will ride it for a while before you move up to a taller mast, when you SUP, Surf, Downwind, Wake or Kite. Some riders might never need a taller mast, depending on their style, local conditions or discipline or riding. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Titanium Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Titanium screws 2 x M8*70 Countersunk 316 grade Torx drive Titanium screws 2 x M8*30 Countersunk 316 grade Torx drive Titanium screws Torx Key for M8* Torx Key for M6* 2 x M6*14 Countersunk 316 grade Torx drive Titanium screws 2 x M6*22 Countersunk 316 grade Torx drive Titanium screws 2 x M6*25 Countersunk 316 grade Torx drive Titanium screws 4 x mast track sliders* 8 x M8 x 25 Countersunk 316 grade Torx drive Titanium screws 4 x M8 x 20 Countersunk 316 grade Torx drive Titanium screws +1 Degree Shim Storage Box *note the torx key and mast track sliders are not titanium

Continuing the huge success of the AXIS 460 Carbon rear wing, was not an easy task. We kept the same chord, foil section, and wingspan of the original 460, but added a splash of turn down on the tips, similar to the Progressive rears.  This created a rear wing that is fast, stable, pumps unreal, and likes to turn with good carving performance. The perfect setup for all dock start, flat water pump, downwinding, wake, lightwind winging, and more.  If you don't have the AXIS 460 v2 rear wing in your bag of rear wings, you are certainly missing out. The AXIS 460 v2 carbon rear wing comes with its own AXIS cover, so your new AXIS wing is nicely protected.  We updated the graphics on this rear wing to show all the technical details you might be interested in (plus some):  Wingspan: 460mmMax Chord: 60mmTrue Area: 229.90cm2Aspect Ratio: 9.3Volume: 82.82cm3

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our 19mm masts are 224% stiffer than the 15mm thick masts (most other foil companies use). It's even stiffer than any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. Do you find the 750mmm just a bit too short for your local spot, but the 900mm is a bit too long? Then the 820mm is certainly the right length for you. Perfect for higher performance riding on Surf, tow-in, Wake, Pump, SUP, Wing or Kite.  Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.As with all of our products, this plate is Designed in New Zealand.

Designed for our entire foil line, the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 750mm mast is mostly used on bigger surf, downwinders and more advanced riding or as a surfy option for kite foiling. Other mast sizes available: 450mm (15.7 inches), 600mm (23.6 inches), 680mm (26.6 inches), 750mm (29.5 inches), 1050mm (41.3 inches)

Our stock setup with no shim is designed to work for the vast majority of riders. By popular demand here is a shim kit for those who want to experiment with different setups. 6 Shims are included, 3 Positive (+0.25, + 0.5, +1.0) and 3 x negative (-0.25, - 0.5, -1.0), these can be stacked to achieve a variety of angles.Adding a Positive shim (we call it positive because it is increasing the angle between front and back wing, usually achieved by lifting the back of rear wing) is useful for heavier riders to provide more front foot pressure, can have a slowing effect. Adding a Negative shim (we call it negative because it is decreasing the angle between front and back wing, usually achieved by lifting the front of rear wing) is useful for lighter riders as it reduces the front foot pressure and can be faster. For a full explanation of how shims work, refer to the Shim section of the AXIS Product Brochure:www.axisfoils.com/current-brochure Remember: USE 25mm M6 Bolts to secure rear wing when using shims

The AXIS Progressive Rear Wings are perfectly paired with our HPS, ART, BSC and PNG wings. Mostly flat but with a very subtle downturn, these wings combine excellent speed with sensational turning. Who are the AXIS Progressive rear wings for?The AXIS Progressive rear wings are all round wings for intermediate and advanced riders paired with higher performance front wings such as HPS, ART, PNG and BSC front wings. You notice the difference in your first carve or gybe. Why did we design the AXIS Progressive rear wings?We got super hooked on the locked in, fast, stable feel of the AXIS Speed 380/60 and 420/60 rear wings, and still are for flat water blasting and racing for winging and big, fast waves for foil surfing. But we had a feeling we still had more to give our riders in the turning department. After several iterations and tweaks, the new Progressive rears have delivered it in spades.Medium aspect, with a thin foil section and subtle turned down tips, this new design rolls into the turn beautifully, feels fluid and loose, and also grips through the carve and transitions back out the other side with predictable control and positive acceleration. Even intermediate foilers will notice the difference straight away. It’s super well-behaved in rough winging conditions (just set and forget) and with the thin foil section, it’s still rewardingly quick. The Progressive rear wings will feel like a natural extension of your feet.Riders are finding the Progressive rears pair beautifully with our AXIS ART and AXIS HPS high aspect front wings, and they’ll work very well with any foil for riders looking to improve their turns and carves. As always, size your Progressive rear wing to your experience and front wing size. (larger sizes for less experienced riders and larger front wing pairings) We obsess over rear wings, almost to the point that it’s a problem. We’ve tried to get professional help but the prototypes just keep getting churned out by our design team on a weekly basis, and we can’t help but test, analyze, pontificate, redesign – and on and on it goes. You may be thinking – why do rear wings matter? Aren’t they just stabilizers to balance the front wing? Well that’s what many thought too – in the very early days. We know that your rear wing can change your life. Okay that’s not quite true, but it will significantly affect the ride characteristics of your whole foil set up.  Try the AXIS Progressive rear wings and you will immediately know what we are talking about. 

Red Advance Fuselage (+40) If you're into pushing the envelope in Prone, SUP, Wake, Wing or Pump, these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected feeling on the larger PNG and BSC front wings? Our new Red Advance fuselage is for you.In three different sizes you get tons of options to fine tune your setup. This design sees the mast position moved 40mm closer to the front foil, opening up entirely new options for performance.The regular Red fuselages are perfectly suited to the majority of riders across all disciplines. By no means are these new Red Advance fuselage intended to replace them. They just provide options for performance and a more connected feel when pushing the limits. As the mast position on the Red Advance Fuselage is moved closer to the front wing, the effective length of the fuselage behind the mast is now slightly increased (by 40mm). When choosing your Red Advance Fuselage, it’s advisable to possibly opt for a length shorter than you are currently using. If you’re currently using an Ultrashort, you might consider the Crazyshort instead.   The Red Advance fuselage is available in Short, Ultrashort and Crazyshort sizing. Compatible with all the front wings that use the red fuselage. Compared to the regular Red fuselage range, these 3 new little siblings provide a looser, smoother transition from side-to-side. The sensation our testers liken it to is similar to the sensation of moving fins forward in the tracks on a surfboard. Initiating turns becomes easier, which is great in the surf. In an effort to reduce the use of cardboard and excess packing material, all the Black and Red ADVANCE fuselages are shipping with the matching new fuselage protective covers. Better for your gear. Better for the environment.

The Broad Spectrum Carve (BSC) wings are a new direction into easy to ride wings, with good amount of performance embedded to the design. Perfect for all round riding including entry level riders. The larger sizes are ideal for PUMPING, SUP, WINGING, WAKE. As we go down on sizing, 890-810-740 are high performance PRONE, WINGING and KITE wings. For the BSC wings we use a refined foil section, with extensive speed range, and stability. This makes the BSC wings ideal for all levels of riders and conditions. The 890 / 810 / 740 sizes are designed for performance PRONE, WINGING and KITE foiling. These wings are stable, fast and turn on a dime. The 1120 and 1060 are the easiest wings for all levels, heavier riders and all rounders for WING, SUP, WAKE and PUMP. Very early lift, butter smooth riding, good speed range, and great turning for their size. The 970 could be the all levels wing for all styles and levels of riding. The 890-810-740 are faster, more technical wings, designed for the skilled SUP, PRONE, WINGING riders who are looking for higher performance in a very easy to ride package. As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil. Compatible with the Red fuselages.  AXIS BSC 1060 Carbon Wing Technical Data: WINGSPAN: 1060 mm / 42 inches MAX CHORD: 200mm / 8 inches ASPECT RATIO: 6.51 ACTUAL AREA 1803 square cm / 278 square inches PROJECTED AREA: 1726 square cm / 268 square inches VOLUME: 2800 cubic cm / 171 cubic inches Recommended use: WING Surfing for all levels and medium + conditions. Super stable for the size Downwinding - Medium+ conditions and intermediate+ level SUP / Surf - Medium+ conditions and intermediate level Wake foiling - Intermediate+ level Pump foiling - Intermediate+ level Windsurf foiling - Intermediate+ level Kite foiling - Ideal for all styles, levels and conditions Here is what the experts say: The BSC wings are incredibly easy to ride. Bigger sizes ideal for lighter days and bigger dudes. Smaller sizes more surfy and faster. Medium AR makes them a bit slower but still faster than last years all rounds.    Rear Wing Options: 500mm Carbon for max control, stability and slower ride (entry levels) 460mm Carbon for high speed and loose turning (advanced) 420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving.  440mm Carbon for control and stability (all levels) 400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate) 390mm Carbon for Wing and Surf with good turning control and additional glide 370mm Carbon for loose feel and fast turning, with less stability (intermediate). The rear wing that does it all  340mm Carbon for even looser feel and even less drag and more speed. (advanced) 500mm Anhedral Carbon specific to windsurf foiling   When you purchase an AXIS carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage. 

The AXIS Red Standard Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 765mm long. Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling. Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts   Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning)

Designed for our entire foil line the AXIS masts are stiff, strong, and ready for any use and conditions. We designed our masts for 2021 to give our foilers a very direct feeling to their foil which is critical for foiling. We even sourced our own high quality aluminium and bought tons of it, to ensure we only have the highest quality raw materials for our foils. Our masts are 224% stiffer than the 15mm thick masts (most other foils on the market). It's even stiffer and any other carbon mast on the market today. This gives you more control and fast input from your feet to the front wing. The 820mm mast is mostly used on bigger surf, downwinders and more advanced riding, or as a surfy option for kite foiling Other mast sizes available: 450mm (15.6 inches) 600mm (23.6 inches) 680mm (26.6 inches) 750mm (29.5 inches) 820mm (32.2 inches) 900mm (35.4 inches) 1050mm (41.3 inches)

Used to connect your 16mm Mast to your Fuselage. AKA "Doodad"  

Whether winging at speed, laying deep carves on a wave face or pumping and linking up swells on a downwinder – AXIS Power Carbon enters a new realm of control and connection between board and foil. It’s the next giant leap in foiling performance.  High aspect foils = higher loads on masts During early ART foil testing, our research team quickly realized that higher aspect ratios and broader foil spans applied more bending and twisting forces to the mast. So while ART foils were a game-changer even on our existing masts, we knew there was still huge untapped potential to be realized. And so began a whole new development project, and we couldn’t be more excited at the result. With a new power profile and carefully considered material selection and placement, AXIS Power Carbon delivers both superior stiffness with next-level strength. Opting for a one-piece design, we avoided the flow/drag and jointing issues associated with multi-part mast constructions. Additionally and more importantly, testing proves that maximum loading is concentrated close to the baseplate and this is why the mast tapers thicker at this point to handle the loads. Any joins or two-piece construction at this high load area would destroy the integrity of the mast.  A revised fuselage connection design maximizes the size of the attachment point to achieve a perfect fit to the fuselage reducing any chance of unwanted movement. The result is a positive connected feel, direct drive, immediate feedback and ultimate control. High aspect foils perform as they should, feel and control enter an entirely new realm.     The new High Modulus Carbon fibre used in our mast layup is considerably stiffer and stronger than the regular carbon fibre used in conventional constructions. Innovative, considered and balanced placement of materials in our proprietary production process paired with rigorous testing has delivered a breathtaking performance leap. Ride characteristics are so game-changing, that it’s been a struggle to get our team riders to return the prototypes after testing! Feedback featured claims like ‘a way more positive and connected feel’, ‘immediate feedback’ and ‘ultimate control’. Choose your Power level Our new masts are available in two models, the Power Carbon and Power Carbon - High Modulus, the latter providing additional strength and 35% more bend resistance than our industry-leading 19mm aluminium mast. The High Modulus will be the mast of choice for the most discerning rider seeking ultimate performance, and heavier riders using our larger span foils. With AXIS Power Carbon masts, riders will finally be at one with the foil. AXIS Power Carbon Masts have a new and greatly improved base connection design. While fully compatible with all existing Red & Black fuselage, a new installation technique/method is required, this involves simply inserting the mast leading edge first into the fuselage opening, then rotating the trailing edge down. Removal is done in reverse, trailing edge rotates out first... super simple! Remember use only 30mm M8 bolts to attach fuselage to Power Carbon masts

The AXIS Red Short Fuselage is a 3D CNC cut anodized aluminium fuselage, length is 680mm long. Incredibly strong connection to any size wings to create a very direct feel from your feet to the front wing, which is the most important part of surf foiling.  Please note: you will need the AXIS Mast Adapter aka the Doodad (in 19mm and 16mm), in order to use with the AXIS Foils Aluminium masts. The doodad is not needed when using the AXIS Foils Carbon Masts Available in multiple sizes for different types of riding. (the longer the fuselage the more stable the ride. The shorter the fuselage the looser and quicker the turning)

The AXIS PNG 1150 Carbon Front wing is the biggest of our newest generation of high aspect wings, focusing on longest and most efficient gliding and pumping. The AXIS PNG 1150, together with the 1300, 1010 and the 910, 910B and 850 form our Pump and Glide wing family. The Pump and Glide wings are designed to be easy and early to lift for their size. The have tons of control, and feel comfortable for most levels of riding. Our Glide wings pump unreal, and glide effortlessly and endlessly. And they are fast wings, but their focus is not to be the fastest wing on the market. But instead, to be the easiest high aspect wing that almost everyone can ride, and can improve their level of riding right away. The PNG 1150 is the biggest wing of the Glide collection. It's in fact the longest wingspan wing we have ever made! We wanted a wing that will lift very very early, and would glide endlessly, w/out slowing down. The PNG 1150 wing was designed to dominate the smallest foiling conditions. From light wind WING Surfing, to tiny bumps SUP and SURF foiling, to effortless lift behind the BOAT, and DOCK starts and PUMPING, the AXIS 1150 performs like no other high aspect wing ever dreamed of. The amount of glide and pumping ability of the AXIS 1150 is tremendous. And probably this is why our testers nominated the AXIS 1150 as the WING SURFING wing. The PNG 1150 carbon wing connects to the red fuselages with 3 x M8, 20mm screws. At 1150mm wingspan the AXIS 1150 is a massive wing, nearly twice as stiff as the 1010, benefiting from the AXIS PNG rigidity and stiffness of engineering and construction. As with every AXIS front wing, the graphics on the wings give you all possible measurements so you can best compare and also quickly swap pieces or get new accessories for your foil. AXIS PNG 1150 Technical Data: WINGSPAN: 1150 mm / 45.25 inches MAX CHORD: 180mm ASPECT RATIO: 7.72 ACTUAL AREA 1778 square cm / 276 square inches PROJECTED AREA: 1713 square cm / 265 square inches VOLUME: 2116 cubic cm / 129 cubic inches Recommended use: WING Surfing for all levels and light / medium conditions Downwinding - Lighter wind / smaller waves SUP / Surf - Tiny bumps and endless gliding Wake foiling - Early lift / easiest pump Pump Foiling - Endless Windsurf foiling - early and super easy lift   Rear Wing Options: 500mm Carbon for max control, stability and slower ride (entry levels) 460mm Carbon for high speed and loose turning (advanced) 420mm Carbon for the ultimate performance (speed and turning - intermediate +). One of our favorite rear wings for fast riding and carving. 440mm Carbon for control and stability (all levels) 400mm Carbon for looser feel and carvy turns while still maintaining good amount of control (Intermediate) 390mm Carbon for Wing and Surf with good turning control and additional glide 370mm Carbon for loose feel and fast turning, with less stability (intermediate). 340mm Carbon for even looser feel and even less drag and more speed. (advanced) 500mm Anhedral Carbon specific to windsurf foiling When you purchase the AXIS PNG 1150mm carbon front wing we include an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.