1750 DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible! Recommended for novice riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 1750 – 75 DELIVERED WITH: UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 1750 – 85 DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 98/1750 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET DESCRIPTION The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.The new Universal carbon front wing 2400 is your ticket to learn how to fly in literally no time and with the lightest wind. Its large and generous dimensions with extra thick profile will let you take off with ease and learn your first jibes and tacks. The rear wing is 52 cm wide and has a negative dihedral to improve the “pumping” and carving ability of the foil. Recommended for novice heavy weight riders, the ideal hydrofoil for schools. UNIVERSAL SW ALU 2400 – 75 DELIVERED WITH: UNIVERSAL ALU MAST 75 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET UNIVERSAL SW ALU 2400 – 85 DELIVERED WITH: UNIVERSAL ALU MAST 85 WITH PLATE and EVA COVER Y26 UNIVERSAL FULL CARBON FRONT WING 110/2400 with PADDED COVER Y26 UNIVERSAL FULL CARBON REAR WING 52/373 Y26 with PADDED COVER Y26 FUSELAGE 76 with EVA COVER Y26 M8 TORX SCREWS & KEY SET M6 TELESCOPE SCREWS & KEY SET
INDIANA Y STRAP INCL. 3 SCREWS & 3 PLATES- Schrauben: metrisch
The new ION safety footstrap offers a adjustable emergency opening during crashes.
2022/23 Naish Jet Foil Series for maximum performance There are three versions: Jet Foil HA (High Aspect) Semi Complete (=no mast) Jet Foil MA (Medium Aspect) Semi complete (=no mast) Jet Foil Standard (Low Aspect) Semi Complete (=no mast) Here are the main differences between these models. High Aspect (HA) Foil: High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio). These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance. High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio. Medium Aspect (MA) Foil: Medium aspect foils strike a balance between the characteristics of high and low aspect foils. They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability. Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control. Low Aspect (LA) Foil: Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio. These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed. Low aspect foils are often chosen for learning to foil and for cruising at lower speeds. When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use. The high number (for example 1600) gives you the surface of the front wing in cm2. Scope of delivery: Jet front wing + EVA cover Stabilizer Jet HA + EVA cover Fuselage Carrying case Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
GRAVITY FCT 2200 COMPLETE FOIL WITH MAST The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential. Right in the line of its best-selling carbon sibling, this new Gravity is the ideal foil to get started and progress in wing-foiling and surf-foiling. Smooth take-off Stability and lift Easy to turn Area: 2195 cm²Span: 110 cmAspect Ratio: 5.5Weight: 2 kg (wing only)Alu Fuselage: 74 Surf
Flat, loose and even faster, the new S178 Stabilizer is a high-speed upgrade to the Sonar Foil System for experienced riders. We recommend pairing the S178 with Front Wing size HA950, or smaller. The S178 has a higher aspect ratio than the S208. Features Top mounted for early breach recovery Carbon pre-preg construction Thin profile section for reduced drag Materials Pre-Preg Carbon
FUSION ALLOY TOP PLATE MKII HIGH PERFORMANCE - DURABILITY SIZES: ONE SIZE The Fusion Alloy Top Plate is constructed from extruded aircraft grade aluminium that result in an incredibly rigid mast to board socket connection. It can be used with any Cab Fusion alloy mast. Features: Precision CNC machined aircraft grade, anodized 6061-T6 aluminium Incredible torsional stiffness
Naish S25 Jet Foil Complete 2450 The Naish S25 Jet Foil Complete 2450 shares many similar features to its smaller 1050 & 1250 counterparts. These larger wings feature a slightly higher aspect ratio in a delta wing planform with moderate anhedral to deliver early lift and a low stall speed while maximizing turning ability. These wings are the ideal choice for larger surfers surf foiling as well as SUP, downwind and Wing-Surf foiling. These wings are paired with the Stabilizer 450 backwing, which gives the complete setup more lift at lower speeds and are optimized for improved turning and pumping performance To make the S25 complete foil Naish’s best yet, each component has been completely redesigned with an emphasis on making them ultra lightweight and strong. The mast is a new design that is 25% lighter while improving bending resistance and torsional strength. The mast also features a new bonding system to the board mount as well as the fuselage connection resulting in a sealed and more direct board connection system. Jet 2450 is ideal for riders +250 lbs Performance Features Jet 2450 Front Wing = Optimized early lift at low speeds Stabilizer 450 Back Wing = Early lift & intuitive turning 75 cm Mast = Improved turning & pumping performance Lighter Design = Better control & response Construction Features Chopped Carbon/UD Carbon Fiber Wing/Stabilizer = 25% lighter than previous years Direct Connect Bonded with Aircraft Grade Extruded Aluminum 75 cm Mast = Solid board connection + sealed mast Updated Aircraft Grade Aluminum Jet/Kite 64cm Fuselage = Lighter for S25 with stainless steel Helicoil M6 thread inserts Jet 2450 - 3 x 30mm & 2 x 20 mm Torx Head Stainless Steel Screws (connect wings to fuselage) = Superior torque + corrosion resistant 3 x 25 mm Torx Head Stainless Steel Screws (connect mast to fuselage) = Superior torque + corrosion resistant 4 x 25 mm Torx Head Stainless Steel Screws and 4 x M6 Tab (direct connect plate to board) = Superior torque + corrosion resistant Tech Specs SizeFront Wing DesignAspect RatioWingspanProjected Surface Area 75 cm Jet 2450 4.1 39.4"/100 cm 380 in²/2450 cm² Naish S25 Jet Foil Complete 2450
Flat, loose and fast, the new S208 Stabilizer is another high performance upgrade to the Sonar Foil System for experienced riders. The S208 has a higher aspect ratio than the S210, which means less drag, and the flatter rondure (front view) enables more manoeuvrability. As we’ve increased our front wing range, we’ve needed to match the lift force of the front wing with the stabilizer. While your front wing creates vertical lift, your stabilizer has a downward acting force, which prevents the front wing from nose-diving. A larger stabilizer translates into more front foot pressure, while a smaller stabilizer equals less front foot pressure. The North stabs are mounted on top of the fuselage, which helps them to avoid turbulence from the flow of the front wing, creating a smoother ride. This top mounting also gives the rider an early breach warning - the stab pierces the water surface first, giving you a better chance of recovery before your front wing gets too high. Like the Front Wings, all Sonar Stabilizers are pre-preg carbon construction, ensuring optimal stiffness and direct performance. The thin profile section reduces drag, while the material properties help maintain structural integrity and rigidity. Stabs have a huge influence on performance. As you progress to smaller wing sizes, we recommend changing to a smaller stabilizer to be more manoeuvrable. Experienced riders will really feel the difference. A new tail can have a big impact on your style. Features Clean undisturbed flow Flat loose and fast Easy breach recovery Thinner profile Higher aspect ratio Less surface friction for better glide Materials Carbon Pre-preg
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all. Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap) Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws
Our new V-STRAPS have been specifically designed for foilboards. The shape and material have been selected to bring maximum comfort and support while riding. Both straps have a thin layer of neo-fleece material on the inside that will bring extra comfort and softness. The main V-shaped piece for your front foot is compatible with boards that have one or two rows of inserts. Two options are available depending on the type of inserts (metal or plastic) on your board: M6 Screw Set (Ref. 77228-8001) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 4x Plastic shims 6x M6 22mm screws (SST 316) 6x Metal washers (SST 316), 12mm external diameter Recommended for : POCKET, POCKET CARBON, ROCKET ASC Self-tapping Screw Set (Ref. 77228-8002) 1x Front V-Strap 1x Back strap 1x V-Block, to place at the center of the V-strap for the screws 6x Self-tapping screws 5x25mm (SUS 316) 6x Metal washers (SST 316), 14mm external diameter 4x Plastic washers (thickness = 2mm), 17mm external diameter Recommended for : ROCKET WING, ROCKET WING CARBON, ROCKET WING – S, ROCKET WING -S CARBON, POCKET CARBON CUSTOM
The F-ONE aluminum mast can be connected to the board with several options. Choose from a 4-bolt top plate, a standard Tuttle head, a KF or a DKF head. All versions are fastened to the mast through a sleeve and a two-bolt system. The Mast Top parts are machined out of solid blocks of 6061 aluminum. The accuracy of the CNC makes sure the geometry of the connection is perfect. Stainless steel inserts are used systematically to preserve the durability of the fastening connections. The Top Plate has become standard on the market and is compatible with any board featuring a Twin-Tracks system. The spacing we use for the four screws is 160×90 mm, but our latest version also features an option for 165×90 mm. The Top Tuttle makes F-ONE foils compatible with all Tuttle boards. The Tuttle format is the original and standard one. A flange has been added around the base of the head to better spread the load through the structure of the board. The KF and DKF heads make current F-ONE foils compatible with kite or SUP foil boards produced previously with these boxes. Refs: 77207-0401 (mast top plate) / 77207-0404 (mast top tuttle) / 77207-0403 (mast top deep kf) / 77207-0402 (mast top kf)
Q01K NOT INCLUDED (KRAKEN QUICK RELEASE) Kraken Mast Plate Kraken Modular System ALL-ROUND Connection SystemKraken Modular System The Kraken Mast Plate is one of the modular connection systems for masts, together with its tuttle counterpart (T03K). The strong point of this system is its modularity, as it is always possible to use your mast both with plate and with tuttle. This Plate has been designed for maximum lightness and strength. It has been milled directly in our factory starting from premium aluminum ingots and then it has been deeply anodized by certified partners. The Kraken Mast Plate also makes it possible to upgrade your set-up with the quick release system (Q01K), thanks to which you can assemble and disassemble your hydrofoil in a few seconds, without losing the configuration on the board.
Exceptional glide. Our new thinner profile and higher aspect ratio carbon stabilizers offer reduced resistance and a more efficient outline. The S270 is your go-to for all round kite, wing and surf performance, offering optimal balance, speed, efficiency and control. Pair the S210 with a smaller front wing for high-speed performance and a more agile feel. Pair the S320 with a larger front wing for early planing, greater balance and stability. Features Clean undisturbed flow Easy breach recovery Thinner profile Higher aspect ratio More efficient outline shape Less surface friction for better glide Materials Carbon Pre-preg
FUSION CARBON HOLLOW MAST HIGH PERFORMANCE - LIGHT WEIGHT SIZES: 74 / 84 / 94 CM The all-new Hollow Mast system is yet another example of the state of the art foil program from Cab Design Works. It nods to the critical & complete design approach of the team to view every foil component individually with a view to improve stiffness across the entire platform. It implements a bladder molded construction with strategic layering of carbon as far to the outside as possible. This culminates in our stiffest ever mast to front wing connection. This reduction in flex eliminates any lag in the turn and transfers energy while pumping seamlessly through to the front wing. Features: Optimized airfoil for low drag to stiffness ratio TE scallop for improved turning and efficiency Integrated high modulus mounting plate Bladder molded, hollow mast construction for superior skin compression, providing ultimate rigidity Premium high modulus prepreg carbon fiber construction Barrel Nut compatible(x-series MkII and H-series MKII) Tapered Fit Mast Guide:
Sabfoil Gullwing 380 Pro Finish | Hydrofoil Stabilizer MAIN SPECS Surface: 180 cm2 AR: 8,10 Wingspan: 380 mm Chord: 60 mm Range Gullwing Stabilizer-Fuselage Connection Standard This fast and versatile stabilizer is ideal for all those who want to increase the control and stability of their hydrofoil. The gullwing shape guarantees good directionality while riding without sacrificing maneuverability when needed. The S380/PF is delivered with SAB Pro Finish, and thus hand sanded to achieve a matte surface with 0-thickness graphics, for an elegant Made in Italy product with maximum performance.
We’ve engineered our Sonar Surf Series for super low stall speeds, effortless pumping and surf-style carving. Ideal for riders wanting more from surf and downwind swells (with or without a wing). The foils insensitivity to angle of attack change forgiveness means you don’t have to be an expert or have perfect pumping technique. A refined balance of roll stability and manoeuvrability gives you confidence during pumping and take-offs, and the ability to initiate powerful rail-to-rail carves. Push it harder, lip stall and lay down banking turns, knowing tip ventilation is a thing of the past. Reduced distance between the mast and front wing makes for faster, tighter pivoting turns. We’ve kept the span similar between the three sizes, providing the same ride feel across the entire size range. The SF promises that frictionless sensation of glide at slower speeds. Responsive and agile. With intuitive recovery. Wakesurfing ten waves back, prone-surfing, wing-surfing, pumping or mastering the downwind. The Sonar SF Series. At one, with it all. Features Recommended with S215 Stabilizer Super low stall speed Effortless pumping Surf-style turning (smooth rail to rail and surf yaw snap Forgiving and accessible for faster progression Materials Pre-Preg Carbon Titanium Screws
GRAVITY CARBON 2200 FLY IN FULL CONTROL The foils of the Gravity line are designed to provide a solid lift with a smooth take-off and great carving potential. Smooth take-off Stability and lift Area: 1760 cm²Span: 90 cmAspect Ratio: 4.6Weight: 1.95 kg (wing only)
Die Mastlänge von 50cm ist ideal für Einsteiger und Schulen. Das Indiana Mastprofil sorgt für eine enorme Flex- und Torsions-Steifigkeit. Die Alu-Masten übertragen daher die Steuerimpulse sehr schnell und direkt vom Board auf das Foil. Um ein komplettes Foil zu erstellen müsst ihr diese sieben Schritte befolgen:Schritt 1: Wählt einen von vier FrontwingsSchritt 2: Wählt einen von zwei StabilizersSchritt 3: Wählt eine von zwei FuselagesSchritt 4: Wählt ein Set of Angle AdaptorsSchritt 5: Wählt eine von drei Mast LängenSchritt 6: Wenn ihr ein Board mit zwei US finboxes/tracks habt, wählt eine Baseplate. Wenn ihr eine Deep Tuttle/Tuttle Box habt, wählt eine Deep Tuttle/Tuttle Adaptor Head UND die Tuttle Adaptor Plate.Schritt 7: Wählt das Set of Mast / Fuselage Screws
WingAir SE PURE WING FOILING Our pure wing foil inflatable. The compact hull and JP’s superior construction provide a stiff feel when flying on the foil. It is super user friendly because it provides all advantages of inflatables: comfortable and smooth on your skin and knees, light and small for easy transport and storage. More on inflatables? See below...There is no better JP board when it comes to pleasurable, enjoyable and hassle-free winging in light winds. Pure wing foiling fun!Top recommendation: The NeilPryde Glide foil fits perfectly and is our first choice – the Glide Wind for beginners and/or heavy weights (for its ease, control and steady lift), the Glide Surf for light and/or advanced riders (for its agility and life).The two sizes from last year (5’4”x27.5” and 6’0”x28.5”) are now partnered with a smaller 5’0”x27.5”. All boards feature footstrap positions for wing-foiling and foiling. Inflatables have clear advantages over hardboards: They are super comfortable and user friendly as they are easy to transport and store. These JP inflatable wing foil boards are specially developed and equipped for early take-off, featuring hard rails, Triple Layer Composite Drop Stitch and more. Additionally, they come in JP’s superior welded technology. Welded Technology: This heat-welded connection was introduced last year and proved to be successful. It creates a very strong mechanical joint that literally fuses two parts into one and thus is superior to the standard gluing. This welding process of amalgamating two different layers into one makes the board safer, lighter and stiffer. Hard Rails: In the tail, the specially developed, super clean hard rails are covered by a fibre reinforced layer of PVC cloth and create a smooth and efficient water release. Thus, the board picks up speed to take-off easily. Touchdowns are smooth and comfortable. Triple Layer: They come with Pre-Laminated Triple Layer Composite Drop Stitch, Fibre Reinforced Stringers in deck and bottom and Welded Rails and will surprise you with their stiffness. Track Foil Plate: The board features a Track Foil Plate of the same size as on our hard boards providing a big range of foil placement. The G10 material adds additional longitudinal stiffness to the hull. On the other hand, this plate is not too long – thus you don’t need an oversized bag but it can still be folded easily into a normal size SUP backpack. Footstraps: The boards come with three easy-to-mount footstraps for wing foiling. Comfort: The hull’s soft skin is covered with a large, slip-proof EVA sheet for unmatched comfort and a safe stance. You also don’t have to worry about mistakes anymore because you won’t get hurt when falling on it. Transport and Storage: Rolled up, the boards fit into a backpack – no more need for a car with roof rack for transport or a big garage for storage. In times when airlines are hesitant to accept windsurf equipment, the boards’ backpack dimensions are a major advantage! ADDITIONALLY INCLUDED ACCESSORIES * 3 straps* Pump* Repair set* User manual* Backpack PLEASE NOTE: Reduced foil track depth [13mm]. Make sure to use the right screw length for your plate mount system!MAX screw length = 13mm + Plate Thickness All JP foil boards come without screws to attach the foil. Reason: The screw length has to match the plate thickness which varies from foil and brand, so, screws are provided by the foil brand. Note: This inflatable JP board features a special G10-track-plate requiring shorter screws, than all our JP composite boards.For example:The screws supplied with NP foils fit all JP composite boards. But these screws are too long for this inflatable!Therefore, NeilPryde now also offers a set of four M8x20 screws (titan, torx key head) in their spare parts range.
High performance prone foil board The high performance Apple Skipper prone foil board: thinner, stiffer, more connected. Surf foiling rapidly evolves and so should your equipment. Advanced riders in our pro and ambassador team were ready for the next step in performance so we designed the Apple Skipper prone. Skipper concept The Skipper concept revolves around a new hull concept. The boards are thin throughout, giving a connected feel to the foil. Under the front foot, the bottom features a unique “bulge” that actually sits slightly lower than the foil box. This bulge displaces water upon touchdown and it makes the board “skip” back up. Ideal for foam bashes and more radical foil surfing. The Skipper prone features grab rails in the nose area, these really help holding on to the board when duck diving. Tight turns in the pocket The outline of the board is much narrower than the other surf foil boards we make. Perfect for tight turns in the pocket and harder carves without the risk of the rail touching the water and slowing you down. Finally the foil boxes are placed slightly forward and they feature the all new Appletree long boxes for more foil placement flexibility. Stick your landings There is also more rocker in the boards bottom, while keeping the deck as flat as possible. This helps sticking landings and it forces the board up when paddling in. You do lose a bit of early planing, but this is a board for experienced riders, who should be fine with a little less volume and paddle power. Lighter and advanced riders The lineup in the Skipper prone is compact throughout. Starting at a 4’5” in 28L. Ideal for lighter and advanced riders. Sizes up do not go up much in length, but more in thickness to gain volume. Stock sizes are 28L, 34L and 40L. In between sizes are available as custom orders. The skipper prone comes as “board only”. Inserts and pads are available as custom options. Dylan Wichmann on the skipper prone 28L: “Being much thinner than the other models, the connection to the foil is much more direct. I really like the outline, being narrower and having a more pulled in tail allows you to turn that much harder, without having to worry about a wide tail catching on the water.” “I also really like the rocker in the nose, while keeping the rest of the board flat. This means you will still be standing parallel to your foil but be less likely to have the nose catch on the water when touching down. I think all surf foil boards will start to look more and more like this model.”
Infos & Characteristics Foil box features several compartments and protection flaps to protect a disassembled foil. Mast, front wing, stabilizer, screws & tools all have a specific room. There’s even a compartment for a helmet. SIZES 1100X310X200MM - 1.45KG
FUSION V-SERIES TAIL STABILIZERS HIGH ASPECT SIZES: 180 / 230 / 285 One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability. Features: Optimal efficiency and maneuverability Flat center, to downward tips, for perfect balance between locked-in feel and agility Single molded components for minimal drag Full prepreg carbon construction PMI core for superior strength to weight ratio 180 cm², WS-340, AR-6.42 230 cm², WS-400, AR-6.96 285 cm², WS-450, AR-7.11 Set Includes: Stabilizer, wing covers, 2pcs m6 ss316 torx Ti coated screws, {(ear fuselage not included)