FOIL DRIVE Assist MAX+

Der FOIL DRIVE FM+ 650 Battery liegt genau im Schnittpunkt aus Laufzeit, Gewicht und Preis und ist die erste Wahl für Gen2.5 Fusion und MAX Units.Mit 648 Wh Kapazität liefert die 43-V-Architektur von Foil Drive kraftvollen, gleichmäßigen Schub und Ausdauer — für lange Surf-Sessions, Upwind-Downwind-Runs, Wake-Riding, Pumpen, Flachwasserstarts und leichtes eFoilen.Der Akku ist so konstruiert, dass er sowohl in der Fusion als auch in der MAX Unit arbeitet. Fahrer können damit einen Akku zwischen zwei sehr unterschiedlichen Setups bewegen. Für MAX-Fahrer ist das der Akku mit der höchsten Kapazität und reichlich Laufzeit für eine komplette Surf-Session. Fusion-Fahrer ergänzen einfach den FM+ Battery Adaptor und bekommen so eine leichtere, wendigere Alternative.Wesentliche Eigenschaften648 Wh Kapazität: höchste Kapazität für MAX-Fahrer43-V-Architektur: kraftvoller, gleichmäßiger SchubKompatibel: Gen2.5 Fusion und MAX UnitFür Fusion: FM+ Battery Adaptor erforderlich bei Systemen vor September 2026

Interchangeable Wing Handles SystemFor those who need maximal freedom, the Carbon Boom lets you position your hands freely. It’s the perfect option for freestyle. Connected to the wing’s webbing by a hard base, this fixed boom enables an intuitive and committed ride with total control and precision, as well as an ergonomic handling and efficient pumping.Ultra-light and stiff, the boom is built in a pre-preg carbon oval tube and EVA grip. It also features EVA bumpers on all angles to protect both rider and gear from shocks.Each wing size is associated with a corresponding boom size. Carbon Boom available in 78 / 90 / 97 / 106 / 120 cmRef. 77251-2031

DescriptionThe technology evolution for kites, wings, and boards has rapidly improved to enhance your experience on the water. However, perhaps the most critical component required to get on the water -the pump- has remained unchanged since the days of flip phones. Not anymore. Gone are the times of struggling with manual pumping, thanks to the Air Box: Ride Engine's rechargeable electric pump. Engineered alongside a top electric pump manufacturer, the Air Box has a powerful two-stage system that automatically switches from low-pressure, high-volume pumping to high-pressure, low-volume delivering the fastest inflation possible.Eliminate the worry of over or under inflating your gear when you set your desired air pressure on the Air Box. The smart inflation technology has real-time pressure monitoring, ensuring an automatic shut-off once the pump reaches the selected pressure. Powered by a lithium-ion battery cell, it can inflate four to six kites or wings, and three SUPs on a single charge.Size 139mm X 125mm X 69mmBattery 4500mAh 14.8VMax PSI 20psiTypes of Motors Brushless DCHigh Volume Motor Max PSI 1.8psiINCLUDES: Air Box Mini, Hose (3'), 4 Nozzles, bag, USB-C Charging CableFEATURES:Compact travel sizeFaster inflationBrushless motorsStandard nozzlesIncreased battery lifeReverse charging

Dakine's kiteboarding specific hook knife has 2 anodized Aluminum opposing blades for easy and instant cutting. This product does comes with an easy-mounting sheath with sewn-in loop to mount to your harness or other location. The hook knife is for emergency situations when you need to untangle yourself from lines. The knife goes straight into the built-in pouch of your spreader bar or harness with no need for an extra pouch. Then it is right there for easy use and in reach when needed. Everyone riding in waves or deeper water should have one of these. Old hook knives can dull or rust over time, especially in the salt water, so check your knife once in a while and replace when necessary.MATERIALS:Two opposing stainless steel cutting bladesAnonized aluminum handleFEATURES:Two opposing stainless steel cutting bladesAnonized aluminum handle

Ultra-thin high-performance carbon mast for maximum glide, speed and direct control The F-ONE UHM Carbon Mast 12 is crafted for riders who demand the very best in glide and performance. Developed with an ultra-thin profile and a highly refined construction, this mast is built to maximize speed, efficiency and direct control across demanding foil disciplines. Ultra-thin profile for exceptional glide and top-end speed With a profile measuring just 12 mm at its thinnest point, this mast is designed to minimize drag and maximize glide. Its tapered chord and thickness make it slightly wider and thicker at the top before narrowing toward the fuselage, creating a shape that helps generate more speed and efficiency on the water. This ultra-thin design makes it especially effective for downwind runs, high-speed wing foiling and kite foiling, while also helping riders gain more pop and height during tricks. UHM Carbon layup for increased rigidity and precision The custom Ultra High Modulus (UHM) Carbon layup makes this mast 25% stiffer in bending than the HM Carbon 14 mast. This provides exceptional rigidity and more precise control in both bending and torsion, resulting in a very direct feel underfoot and excellent maneuverability. The UHM Carbon fiber layup is also 1.2x stiffer than High Modulus Carbon and 1.8x stiffer than regular carbon fiber, giving this mast the structural performance needed for such a thin profile. Advanced one-piece construction with optimized internal structure Molded and cured in a single shot from carbon pre-preg, the one-piece construction integrates F-ONE’s optimized SPINE internal structure. This enhances rigidity, efficiency and control, especially through turns, while delivering a higher level of stiffness, precision and overall performance. The use of pre-preg technology ensures an optimized epoxy-to-carbon ratio, resulting in a lighter, stiffer and stronger construction with excellent durability. New TITAN 2 connection and updated top plate The mast features the new top plate and updated TITAN 2 mast foot at the bottom. The redesigned top plate is compatible with lockable T-nuts and includes the keyhole-shaped Quick-Attach System for faster assembly. The TITAN 2 connection improves structural efficiency, rigidity and reliability at the mast-to-foil connection. Built around a reinforced structure using only two M8 screws, it delivers a more direct feel, improved pumping and a stronger foil connection while maintaining excellent hydrodynamic performance. This mast is compatible with virtually all boards on the market featuring the Twin-Tracks system and with all front wings using the TITAN 2 connection. Key features Ultra-thin 12 mm profile Maximum glide and speed Increased rigidity for a direct feel and total control Custom Ultra High Modulus Carbon layup 25% stiffer in bending than the HM Carbon 14 mast Optimized SPINE technology for rigidity, efficiency and control One-piece carbon pre-preg construction New top plate with Quick-Attach System TITAN 2 connection for better structural efficiency and a more direct feel Compatible with Twin-Tracks boards and TITAN 2 front wings Program Efficiency / Glide: 100% Bending Stiffness: 95% Torsion Stiffness: 65% Sizes 75 cm 80 cm 85 cm 95 cm Sold with Three-piece soft cover 4x M6-25 mm tapered head screws 4x T-Nuts M6 User Guide