SABFOIL FOAM PADS FOR PLATE

These six shims can change the incidence angle of your stabilizer for -0,5°/-1°/-1,5°/-2°/-2,5°/-3° degrees

Allen Keys, Torx Keys and Lithium GreaseAllen Key 3mm x 1Allen Key 5mm x 1Torx Key 3mm x 1Lithium Grease x 1Hexagonal Allen Key 6mm x 1Set of keys and lithium grease for the assembly and maintenance of your hydrofoil kit.

Hardware Kit S325/S355/S375/S380/S395/S425/S430/S450/S480/S483 Flat Head Screws Torx M6x20 x 1 Flat Head Screws Torx M6x16 x 1 Screws to connect S325/S380/S425/S430/S450/S480/S483 stabilizers to fuselage.

Hardware Kit WL950/WL1150/WL1350/WL1550/WL1750/WM999 Flat Head Screw Hex M8x35 x 2 Flat Head Screw Hex M8x40 x 1 Screws to connect WL950/WL1150/WL1350/WL1550/WL1750 front wings to fuselage.

Sacrificial Anodes Replacement Kit Sacrificial Anode x 2 Cylindrical Head Screws M4x10 x 4 SystemKraken Modular System

Hardware Kit Plate/Mini Tuttle to Mast Cylindrical Head Screws M6x35 with Hexagon x 2 Washers 6x10x1 x 2 Torx Countersunk Head Screws M6X40 x 2 Use the two M6x35 cylindrical head screws together with the 6x10x1 washers to connect the Aluminum Plate (P02K) or the Mini Tuttle (T03K) to your mast.Use the two M6x40 torx countersunk head screws to connect the Carbon Plate (CP02K) to your mast.

Hardware Kit WT790/WT1100/WT1250/WM699/WM799 Flat Head Screws Hex M8x35 x 1 Flat Head Screws Hex M8x30 x 2 Screws to connect WT790/WT1100/WT1250/WM699/WM799 front wings fuselage.

This case is a useful solution for storing main tools.   This case is a useful solution for storing main tools. Small in size but large in capacity to keep the most used tools on hand. Dimensions: 250x120x60mm

SAB Pro Finish - Glider Only PUMP FOILSUP FOILDOWNWINDAvailable November 2024 on Pre-Order- Leviathan PRO 1360-663-370Sabfoil Leviathan PRO hydrofoil gliderWLP/1360 - SF/370 - F663K RangeLeviathan PRORecommended forSUP - Pumping - Downwind - Dock-Start - Fast Downwind - SUP Race - Pump RaceTake Off Speed7 - 9 knTop End Speed (average 80kg user)19 - 21 knSabfoil's most advanced pumping machine.The WLP/1360 is the best compromise between take-off lift, pumping ability and speed, always maintining a super efficiency thanks to its ultra-high AR. Slightly slower than other Leviathan PRO foils, but made to perform and enjoy in pumping sessions and dock-start, as well as in very light conditions.If you come from the legendary Leviathan 1350 this is an upgrade you cannot miss!Bag and Titanium Quick Release System (Q02K) includedParts made of high-modulus carbon are super stiff and high-performing, and for this reason they are also more fragile and susceptible to impacts. For these reasons this set is not suitable for jumps and freestyle, and its use for these kind of activities can be dangerous and so not allowed nor covered by warranty.Also the size and aim of this front wing make it unsuitable for jumps and freestyle, as well as its use paired with Piuma fuselages and masts.