SABFOIL HARDWARE KIT WT790/WT1100/WT1250/WM699/WM799 2024

Hardware Kit FKR604 Flat Head screws M6x20mm x 2 Screws to connect race fuselage FKR604 to mast.

Hardware Kit F700HS/F899HS/F900HS Socket Head Cap Screws M6x30 x 2 Washers x 2 Screws to connect F700HS/F899HS/F900HS fuselages to mast.

FeaturesSuitable for wings with booms/handlesEasy mounting systemDurable Dyneema SK78 sleeve with elastic coreKeeps harnessline in fixed positionSlides easily for optimal freedom of movement when hooked inAllows gibes without unhooking

Hardware Kit S330Y/S370/S376/S399/S400/SRD339/SRD379 Flat Head screws M6x16mm x 2 Screws to connect S330Y/S370/S376/S399/S400 stabilizers to fuselage.

Hardware Kit Carbon Plate to Rail Board Flat Head Screws Hex M8x30 x 4 Truck Nuts M8 x 4 Hardware Kit to connect your carbon plate CP02K to Rail Boards (Kraken Modular System).

Hardware Kit Shims for Quick Release System (Q01K) Inox Shims 6,1x12x0,15 x 20 Spacer Q01K - CP02K x 2 Shims to set Quick Release System (Q01K) on Carbon Plate CP02K.

A harness built for freedom of movement. The Stage Wing Harness features a sliding hook, giving you full range of motion, less restriction when pumping, and the ability to slide it to the side for easy paddling. Designed with a unique Velcro closure system, it keeps the sides clean and clutter-free. Stainless steel rings and two connection points allow for flexible setup, whether you're attaching a wing leash, board leash, or both. Choose between the loop for quick release or the knot method, depending on your setup. Finished with non-water-absorbing padding to keep it lightweight and comfortable.

WING FOILSURF FOILPUMP FOILFuselage 663 T8/R8MAIN SPECSLength: 663 mmFront Wing Conn. Type: T8Mast Conn. System: R8Recommended forWave - Freestyle - Freeride - Pumping - Surf - Dock-StartMast-Fuselage ConnectionKMSWing-Fuselage ConnectionT8Stabilizer-Fuselage ConnectionStandard663 mm aluminum fuselage, with T8 front wing connection type (big chord and M8 screws).The use of M8 screws for the connection to the mast and the renewed and optimized design, make the Kraken fuselage range even more resistant while maintaining performance.Each fuselage is processed directly in our factory with numerical control machines starting from premium aluminum, then it is subjected to a deep anodizing treatment by certified partners.Dimensions & Advanced specsFuselage - Length663 mmFuselage - Stabilizer Angle-2,3°Fuselage - MaterialAluminumFuselage - Surface TreatmentDeep AnodizationFuselage - Weight (ca.)858 gFuselage - Mast Connection SystemR8Fuselage - Front Wing Connection TypeT8

SAB Pro Finish Sabfoil Flat 370 | Hydrofoil StabilizerMAIN SPECSSurface: 195 cm2AR: 7,00Wingspan: 370 mmChord: 67,5 mm RangeFlatStabilizer-Fuselage ConnectionStandardRecommended with front wings600 - 1100 cm2This stabilizer makes maneuverability its strong point, thanks to its flat profile and lack of winglets.The S370/PF is hand sanded to achieve a matte surface with 0-thickness graphics, the SAB Pro Finish, for an elegant Made in Italy product with maximum performance.